Can someone please help me...please

 

Bronze Member
Username: Jryevols

Little rock, Arkansas USA

Post Number: 72
Registered: Mar-07
have a pansat 3500sd. I pick up 110 & 119 fine they are run to
switch 2 & 3.I am receiving them on two seperate old DTV dishes. The
third dish which is different shapped than the others more horizonal a
disnet dish , I have been trying to get 61.5 or 129 and cannot get
nothing. The signals will not even change on the installation screen.
Could it be something wrong with the switch , or the receiver. I set
the sat. at Echostar 3 and the dish is pointed correctly. I have moved
it everywhere , even tried to pick up the 110 or 119 on Echostar and
get no signal variation. No quality ever shows up. Should I have
thesame type of dish as the old direct TV. I have gotten 61.5 before ,
but on a different size dish. Can anyone help me
 

Gold Member
Username: Donnie1973

Post Number: 2858
Registered: May-06
I would try to get 61 all by itself first, without any disecq switches. If it wont come in, then u have bigger problems.
then...


try 119 on disecq 1
110 on port 2
61 on 3
adjust in the ant settings these parameters
 

Gold Member
Username: Kirankumar

NO Bashing

Post Number: 2511
Registered: Oct-07
go to www.dishpointer.com and make sure your dish is aligned right
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us