2700a, one reciever, 2 tv hook up

 

New member
Username: Frinko

Post Number: 1
Registered: Apr-08
Hi, I would like to know how to hook up my pansat 2700a receiver to two tvs and be able to watch the same thing on both of them.

Thanks
 

Platinum Member
Username: Lklives

Post Number: 15364
Registered: Jan-06
Buy a cheap $3 splitter from anyplace...and place it between the receiver and the 2 TV's..
 

Platinum Member
Username: Nydas

Post Number: 10130
Registered: Jun-06
Of course, you will need the current cable to go into the input of the splitter, and you will need two cables to connect from the two outputs of the splitter to the TVs.
 

New member
Username: Frinko

Post Number: 2
Registered: Apr-08
okay so what outlet in the back of the receiver should i connect the cable to
 

Platinum Member
Username: Nydas

Post Number: 10141
Registered: Jun-06
Outside cable to splitter.
Cables from splitter to antenna of each receiver
 

Platinum Member
Username: Lklives

Post Number: 15367
Registered: Jan-06
Look! ...U can figure which outlet on back...if not, then subscribe ..
 

Platinum Member
Username: Nydas

Post Number: 10147
Registered: Jun-06
LK can't figure the outlets she has. she won't be able to tell you anything about outlets on your receiver or computer.
 

Platinum Member
Username: Nydas

Post Number: 10150
Registered: Jun-06
LK can't figure the outlets she has. she won't be able to tell you anything about outlets on your receiver or computer.
 

Silver Member
Username: Gregraf

Post Number: 132
Registered: Dec-07
Nalin Nyda will kill your FTA box. Warning dont listen to her
 

Silver Member
Username: Pulpfiktion

Post Number: 121
Registered: Mar-08
Tru likeness of greg raf

Upload
 

Silver Member
Username: Gregraf

Post Number: 151
Registered: Dec-07
Nalin Nyda is a LOSER
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us