Need Help with Autoroll and No Satellite Signal

 

New member
Username: Laguna

Post Number: 5
Registered: Apr-08
Can someone help please? I get some channels on echo 1,2 148w, but others show autoroll processing. I suspect it has to do with antenna setup or Auto Diseqc b/c sometimes if I press f1 in the antenna setup screen which is auto diseqc, it searches and says auto diseqc successful and then the channels come through instead of saying autoroll processing. Settings are as follows. Thanks in advance...

Satellite: Echo 1,2 148W
Satellite: Echo 7 119W
LNB Power: ON
LNB Type: OCS-DP
LNB Freq: 11250
22KHZ: OFF
TP Freq:12224
DisEQC1.0: Port 4
Motor: Off
Legacy: None
 

New member
Username: Laguna

Post Number: 6
Registered: Apr-08
Its a viewsat xtrm 2000 and the autoroll processing is basically occurring on the pay per view channels.
 

Gold Member
Username: Kirankumar

NO Bashing

Post Number: 2444
Registered: Oct-07
assign port 1 to 119
and port 2 to 148
also after that try changing lnb type from ocs dp to single or standard and that should give you good quality
then scan each satellite
 

Bronze Member
Username: Palaceayc786

Post Number: 81
Registered: Dec-07
same problem but its only 624 sahara one TV.. that is autorolling... it happened after i put the new bin in
 

New member
Username: Laguna

Post Number: 7
Registered: Apr-08
African,

How do I assign ports per your instructions? Also, how then do I scan the satellite. Sorry, I am new to this. Thanks
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us