There is just WAY too much confusion being caused these days on how to convert the boxes from point A to point B and back again, so in an effort to keep things together and organised better in a way that is good for everyone and is user-friendly; Fwank7, Nkk_Mty and myself are working together and will keep things going strong...
As posted else-where, LZMA compression is ONLY out because I released it and should NOT have (it was just a test to see if it was possible)--(nobody's perfect)...but the fact is, we don't need it (and probly won't) as new ideas have shown that much more is possible with PUFF--and it's faster then LZMA--as a result of that: we have finally decided that PUFF will be the main method and will keep Lzma just as a backup in case we need it since PUFF gives more advantage and safety for the end users and the compression itself is easier to work with and does the task at hand.
So from this point on, anything to do with B-75 and LZMA binfiles will not be from us and we assume no responsability for what others bins may or may not do to anyone's box.
We're not saying we won't help people in need, just that if someone uses a bin not done by us, anything goes, time will show those who know what their doing and those that don't.
---------------------------------------------------That is why this is called TESTING------------------------------------------------------
Those who wish to TesT the lzma further will have to do so with-out our help, we are focusing on PUFF as a '1 for all' so everyone runs the same and with as few issues as possible. We hope people can understand why we're doing this (not that it matters) but WE feel it must be done to cut the confusion to a minimum.