Hey guys, i am trying to jtag my pansat 3500 sd. when i launch the wall program, a warning box comes out with an ok button in it, when i press ok, the whole program closes!!! any ideas how to launch this wall program. thank's
Right click on wall.exe and click on properties -> go to Compatibility tab -> choose Run this program compatibility mode for ... choose appropriate OS Version -> click OK. ... then follow jtag instructions.
peter, my friend, it is still not working. I have another question. I am using a Jtag cable which i bought from e-bay. i did not add any resistors to it. is it ok?
Bob, when u get a fail DCU, keep on trying like Peter suggested. If you are lucky, the next try will work, else u may have to restart a few times. I'm sure it will work but not sure when -
thank you guys for your help. I opened the jtag cable that i bought on ebay and i did not find any resistors. i am gonna buy 5 resistors (100 ohm, 1/8 watt each) then i will solder them to the cable and see what will happen! what do you think?
