Viewsat stuck on boot any suggestions

 

Silver Member
Username: Birdwatcher

Post Number: 741
Registered: Jul-06
Ive tried virgin files, Ive tried flash fail fixes and nothing seems to get my box out of boot mode. anyone have suggestions or should i just trash this box and order another. Its not a clone as ive been using genuine fixes for eight months.
 

Gold Member
Username: Kirankumar

NO Bashing

Post Number: 2425
Registered: Oct-07
look at this thread, we are looking for a solution but don't have one right now

https://www.ecoustics.com/electronics/forum/home-video/471127.html
 

Bronze Member
Username: Budgie123

Post Number: 37
Registered: Sep-06
the fact itself proves yours is a clone, davidvandiesel.

All you have to do is open up the box, remove the tsop grounding wire (which prevents the box from been killed by the clone killing bin), then load the new bin, after that you can reconnect the wire so the box won't be killed in the future.

good luck.
 

Silver Member
Username: Birdwatcher

Post Number: 744
Registered: Jul-06
thanks Mark, this procedure works which proves i have a clone with brown boards. But it works so thanks for your time.
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 2660
Registered: Oct-06
Where did yo get your virgin from?
Cuz maybe there is a recall

Upload
 

Gold Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 1683
Registered: Jan-08
davidvandiesel unplug Dish cable

In your package box with receiver is furnish a cable RS-232 you must download factory bin with the cable from your computer .
Go to: <[link removed]>
download this 2 files:
PVR/Ultra Loader v1.1 - Firmware Updater ( Serial)you install this one on computer
VS2000 ULTRA Factory Bin File - V132
for download with the loader in your receiver

close rear switch on receiver
open program take file v131
clic to download in receiver and a second after
switch on
the transfert take 5-10 mins
you must see 0000
download the last bin with USB
Good luck

Note i dont see which model, this is for Ultra
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us