Which file for PUFF conversion FLU


Bronze Member
Username: Somokano

Post Number: 26
Registered: Nov-07

I have Fortec FLU converted to PUFF which file I should use for (Fortec-pantec 261 puff) or something else and I appreciate if someone will post upzip bin file so that those who can not unzip that zip file can download to the receiver

thanks in advance

Diamond Member
Username: Lklives

Post Number: 15125
Registered: Jan-06
Jvvh-Team-PUFF Conversion made simple & 261 bins


If your box is still using original software such as Boot60 and/or 294t type bins and you want to convert your box to PUFF, you MUST fisrt load the b75_m 64k bootfile using UkRoNiCs BOX Updater.420. set to Boot and box ON completely (Straight-through cable) *Check your COM settings* hit the write button..box will reboot (B-75 B-75) continue on by loading in the jvvh_208_1.bin, same loader, but turn box OFF/On from main power, and at fisrt display of lights on the front (or first 'b') *same COM settings* hit the write button..box will again reboot (B-75 will stick on 5 for 30 seconds) then come ON.
Proceed to step #2

Converting to PUFF_1.0.1 from any (B-75/Lzma/Old Puff)*with the exception listed above*

The most common factor lately, seems to be the loaders that work for some and not for others... thats a matter of trial and error on your part. The ones I have listed have been tested and work for me, so if it works for you...use it. Or READ around they're easy to find.
If you keep a channel list...save it before proceeding as this following will WIPE CLEAN any and all settings you had.
Open UkRoNiCs BOX Updater .420. select -Ukr_PUFF1.0.1_ConvertBOX.bin- 1mb
OFF/On....on fisrt lights hit the write button...box will reboot into 'rolling PUFF'--this indicates 'waiting for PUFF bin'.
Using same loader..no need to OFF/ON the box at this point (but it wont kill it if you do),
select the Team-PUFF bin of choice up to the latest 261 (unless otherwise posted by us)
hit the write button when ready, box will again reboot, will pause of last 'F', and turn ON.
This brings up the language screen and the rest is up to you.
BTW* no need to set default keys--but couldnt hurt*

[link removed]

BTW...every file U need to convert to from old pansat 2500 to B75 2700...and then to Puff 2700, if ya want is also right here..

[link removed]

jvvh m bin
jvvh 208 bin
Puff loaders (2 of em)
Puff convertbox file
Puff 261 file

Bronze Member
Username: Flu_guy

Post Number: 83
Registered: Aug-07
1) I have just installed: FWANK7_Jvvh_Team_PUFF_261.bin in my (Puff) converted FLU and it seems to be working fine.
2) Windows XP supports zip files natively, (unless a third party decompression utility has been installed), and this is the easiest to use. Just drag the .bin out of the zipped file, (shown as a folder), into your working folder, and you are done.
You can find the files in Nalins Box here: http://public.box.net/2500_full_kit


Bronze Member
Username: Gregraf

Post Number: 87
Registered: Dec-07
Warning Nalins box will fry your boxUpload

Bronze Member
Username: South2

Post Number: 78
Registered: Oct-06
Hi LK,

In your post above you mentioned loading Ukr_PUFF1.0.1_ConvertBOX.bin- 1mb. I found Ukr_PUFF1(1).0.1convertBox.zip (432 KB. Is this the right file. And when I open the loader, do I select "bin" or "boot" to load this file? thanks in advance.

New member
Username: Kashif8597

Post Number: 1
Registered: Apr-08
I have fortec star ultra. I recently got it converted by someone who told me I should use Pantec files. Is it save to use FWANK7_Jvvh_Team_PUFF_261.bin

Please help and let me know.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us