Dashing (----) nite rider lites fix for all receivers
U have simple nite rider lights (----) on the display window.....box is far from dead...simple fix...use 2 hands...shut off receiver with rear switch...get loader and factory bin ready...with one hand, turn on receiver with rear switch,
IMPORTANT...... IMMEDIATELY at first dash , click loader "download/write" button, with mouse using other hand...and upload the factory fix...its all about timing and being persistent...may take 30 attempts...then reload the latest fix correctly ...or do it the same way as this..a force upload
are u sure its going to work? damn i had same problem with my viewsat extreme problem...until i gave it away i thought it was dead.. if it works.... good job..
If yuy want or need any file or How To Guide, use any of the sites listed in this thread. You will probably have to register at the site - they are all FREE.
Please do NOT ask here "where can I get this file?"
Always go to "home site of your receiver" first. The sites in BOLD offer direct downloads without registration.
Sada Go on viewsatusa.com/support and try this loader : VSPRO Loader - Firmware Updater ( Serial) I know this is not the good one and that why you must take this one. That just mislead and force to load. You may not bust your box. Do a hard reboot between each load. Good luck
Plymouth...Sada give away his Extreme to his friend already. And now he is using his NFusion now.LOL
And YUH...LK is right about those niterider. i had fixed that many time..nothing to worry when you see niterider light..just reload the factory bin and the latest bin..
LK when my box dead, i try all loader available and this one is the only one who work. Extreme, ultra and vspro have same microcontroller base. The VSPRO is the best evolution of all. I'm in microcontroller since 20 years.
Plymouth..i think Sada saw the niterider and he think it dead...he just give it away to his friend.. i don't think he even try to fix it..i don't think he even know what niterider at that time..
I don't care who says what..this works 100% of the time if U have ---- dashing nite rider lights...
its that simple...no need to argue or beat this to death...U don't need a different loader or anything special...just the loader for your receiver and the factory fix...
U can use a loader for a Toyota Highlander and a microwave oven, if ya want...
but all u need is the CORRECT loader and factory fix..and 2 functioning hands, some eyesight, and a functioning brain!...any normal 10 yr old can do this..
If people want to use a pogo stick, a rabbits foot, 3 horseshoes, 12 computers, 6 adults, 8 differnt loaders, 5 manuals, 82 files, etc to do this then fine...but its all a waste and not needed... I prefer to do things the right and most simple way, using ONLY the correct loader and factory file..
i already gave away to guy (sat shop) to fix. it .. stayed there for couple of months.. guy tried to fix it..no luck.. that guy also have 20 other viewsat (clone)..same problem.. (i should try one to fix it.. make some money and buy neosat ipro2000)... i gave him some extra bucks and bought cs6100..asked everybody here.. how is the suport they said verygood... now i still own it.. sitting there...bins are changing every day...wanna sell it even for $ 100 .....any one
so its gone...... i guess u guys forgot...i was banned from this site... i was newbee at time.. i listen to someguy .... and load the old file.. and my rec was dead.. i tried to get help from here.. but everyone said its dead... i was so mad... i put a ho*mo pic for that guy.., ecoustics suspended my account, i had to get a new one.. but as i see now that even the reputable member put naked pics etc on board and they don't get suspended so now i am not listening to cartier about downloading any old bin for nfusion..
clones can be fixed,i saw a desi guy at his store adding some kind of cables,he had a whole pile of them that he was fixing,he didn't let me look closely,i saw he was adding a cable to the chip on the main board that is not on the original
Turn off VS receivers over night from now on They'll continue to target VS with a series of key change to force VS receivers to act strange usually after midnight EST. Also if yo notice black screen as yo watch TV turn off receiver quickly and leave it off when not using it. Series of key change will be every 30 minutes usually pass midnight when they are messing with it. My receiver didn't act strange cuz I started to turn it off over night
As a coach I made a living from expecting opponent's next move before they actually apply it I think I'm pretty good at it by now
guys, this nite rider thing happend to me couple days ago.
I have vs ultra ..for those who have one. make sure you go to ftatalk.com for loader2 again ftatalk.com for loader2 ( and of course get the factory bin).
the loader post at viewsatusa.com is loader1 , and it will not work for vs ultra.
don't make the same mistake i made...it will save u sometime ..
Hi Plymouth I always will be around I practice and travel with my team more often Please fill me in from time to time I hardly watch any TV now days But I like to know PTA updates I really started to love PTA lately for the adventure
