|
Bronze Member Username: Tut22Post Number: 12 Registered: Feb-08 | Hello, I have a pansat converted 2500-2700. I downloaded the latest bin which is JWH BIN 253. After I did a scan for the channels, it says "wait for picture" and its downloading, but nothing happens, I tried switching it off and then on, but nothing happens...any ideas? Thank you so much! |
|
Gold Member Username: NydasPost Number: 8600 Registered: Jun-06 | Make sure, your user setup is oK - Date/time/time sone etc, and closed caption is off. Usually by the time you have finished the Blind scan, you will have keys loaded. Go into Menu/cas control/second pin 0000/Set Default key. Exit..Exit..Exit. Turn off at back and turn on again. If the keys don't come in nicely, Try one of the other BINs. The BL_253T and the _Nkk Bins are working very well. You can get the full kit or all the 253 conversion BINs All_253.zip file has all the conversion 253 BINs released so far. The full kit is in full_kit253E.zip or later. Download and unzip in a new jvvh directory. Read the instructions in the Instructions.doc file. http://public.box.net/2500_full_kit |
|
Bronze Member Username: Tut22Post Number: 13 Registered: Feb-08 | Thank you so much Nalin, it worked! |