LK, i had 2 dishes,1 for 119&110 and 2nd for 61.5 i now added another dish for 91 my problem is when i hook up to switch i can not get 91 i am using chieta switch 4in 1 out 119 port 1 110 port 2 61.5 port 3 91 port 4 when i want to watch 91 i have to bypass the switch and hook up directly any suggestions would be helpful
I know I'm not LK, but you might need a new switch. Try running your dish for 91 through another port that you know is working. It's a pain but that's one way to check it.
Yo have a port conflict Could be anything From a simple antenna installation to an LNB Compatibility issue
What I normally do When I have multiple satellites On my VS receiver Sat button I select desired sat I want to watch For example: - Echo 3 package for 6.5 - BEV package for 91 - Echo star for 110/119 ec. THIS ACTS LIKE A SWITCH
Yo also may TRY set 91 to port-1
91 port 1 119 port 2 110 port 3 61.5 port 4 As long as yo reflect same order in antenna setup Make sure receiver turned off when changing coaxial cables