VS extreme reboots automatically every 4 minutes

 

Bronze Member
Username: Dafidof

Post Number: 51
Registered: Dec-07
It's been since I've load the DBPSW-080222X bin, also it always asks for the pin code eventhough I switched it off in the menu.
 

Silver Member
Username: Oleg1474

Florida Usa

Post Number: 969
Registered: Aug-06
reboot sistem or load new Bin againe.
 

Silver Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 197
Registered: Jan-08
load factory bin v131 at viewsatusa.com/ support and turn off rear switch for 5 sec. and load last bin. Before load a new bin everytime hard boot and the same if you see system slow response
 

Bronze Member
Username: Dafidof

Post Number: 52
Registered: Dec-07
thanks plymouth, i loaded factory bin 278 (cos i have vs xtreme) then i reloaded the last bin but i still have the same probleme. do you think that this probleme is related to the new bin cos i had the same probleme with 214bin
 

Silver Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 207
Registered: Jan-08
Put last fix bin from dsstesterDOTcom
 

Silver Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 208
Registered: Jan-08
error
disconnect antenne and
switch off (rear panel) for 5 secs
put dsstester-VS_Ultra_FAIL_FIX.zip
switch off again secs and
put last bin
reply if it work please
 

Bronze Member
Username: Dafidof

Post Number: 54
Registered: Dec-07
are you sure I can use dsstester-VS_Ultra_FAIL_FIX.zip instead of extreme one?

Note: I've a vs extreme

thx plymouth
 

Silver Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 253
Registered: Jan-08
Excuse me take the good fail for your box. I was very busy when answer you
 

Silver Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 254
Registered: Jan-08
I search and dont find fail for your box try to load last bin with cable. Note you prepared for download when you switch on (rear panel)and sychrone in the same time clic to down load.
you install loader on computer and download last bin
Good luck
Reply
 

Silver Member
Username: Madflea168

Post Number: 287
Registered: Jan-08
the last option is probably load the fac bin then do a factory default.

there are some post mentioned wait couple of minutes in between loading fac and mod bins.

good luck.
 

Bronze Member
Username: Dafidof

Post Number: 55
Registered: Dec-07
Sorry guys but all those things don't work :-(((

any new advices!!!

thank you
 

Silver Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 263
Registered: Jan-08
Dafi unplug your box for i hour and retry what i said 2 post up. You have what we call dead box. This the only thing you can make. My friend have a Captain box and dead too. This afternoon my vs ultra loose all info when i ajust dish for nothing. Fta is not easy. Good lock
 

Silver Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 283
Registered: Jan-08
This morning my box DEAD goes on and off for the first time |!"/$%?%? put factory and new bin didnt work.
 

Silver Member
Username: Metallica

Post Number: 188
Registered: Jan-08
Plymouth..sorry to hear that.
and hope you find a way to fix it soon...
Good Luck.
 

Silver Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 284
Registered: Jan-08
I now recover my box only with bin 11 feb 2008. It seem to be a virus in last 2 bins , they blow when i put bin 19 feb 2007.
I download and instal PVR LOADER From Viewsat with
RS-232 cable and load with it.
YES YES YES
 

Gold Member
Username: Kirankumar

Kenya

Post Number: 1721
Registered: Oct-07
good job Plymouth,
enjoy when new bin comes out
 

Silver Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 286
Registered: Jan-08
Thank African i'm very happy now. Dafi try it.
The factory bin make nothing.
 

Bronze Member
Username: Dafidof

Post Number: 56
Registered: Dec-07
sorry for replaying so late,, i am going to try it playmouth,, but do you have a vs xtrem too???
just to make sure we have the same receiver,,
reply pls
 

Silver Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 358
Registered: Jan-08
Playmouth?
 

Gold Member
Username: Doreenakadj

Ontario Canada

Post Number: 1235
Registered: Dec-06
for veiwsat xtreme
all you needed to do was a factory reset.... load factory boot (factory2012mainpg.pgm) or newer
load newest bin (dbpsw-080226x) feb 25
rescan for sats and channels
 

Silver Member
Username: Plymouth

Quebec city, Quebec Canada

Post Number: 359
Registered: Jan-08
you download from viewsat and install:
Loader 1 - Firmware Updater (Plat and Xtreme)
You download and load in:
VS2000 Xtreme Factory Bin File - V278
If not work install bin 19 feb 2008
if that work install last bin
Good luck
Reply
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us