hey guys I need help with setting up 119. I'm using an elliptical dish, 24" wide.
i have set up 110 first, and the signal is at some 75%, but when i try to tilt the dish (ie. steering wheel motion), i'm not getting any signal on the 119.
this is my setup: 110°: standard lnb lnb freq.: 11250 tp freq: 1224 diseqc: port 3
119°: everything same, except port 2.
its a Digiwave dish, with 2 dual Ku_Band LNBF, model# DGD890
its 2 lnb's, 1 for each sat. 12560 is not an option, i'm using VS ultra, 11250 is the highest that gives me a signal (but 0 quality) the rest are 11200,1100 and below.
i changed the TP to 12239, but I cannot save it as it always goes back to 12224, so I just did a channel search under tp 12239 and it found some 240+ channels, they are working. should i try and see if other TP's are giving me a sig and do a channel search under them, or thats it.