is it possible to have one of the 4-way diseq switch ports not working e.g 1, 2 & 4 fully functional with 80% signal strength n' quality but nothing on #3. e.g., 110 or 119 plugged into #3 shows 0% quality but if they are plugged to 1 , 2 or 4 the quality meter goes to 80-90%
hey african thats exactly how you told me how to check the switch...and it was bad no sig on one port..what makes that switch malfunction? I dont think i ever unplugged it with the receiver on, I have it out of the weather but not the cold(-25C) thks again for your help.