Silver Member Username: Frobi
Post Number: 186
Registered: Aug-06
|
Posted on How do you load bin using usb ? Transfered bin on usb stick, selected front usb port, went in menu, upgrade software, ok, but it did nothing. |
Gold Member Username: Kirankumar
Kenya
Post Number: 1497
Registered: Oct-07
|
Posted on 1. did you format your usb to fat32
2. did you unzip the file before loading to usb |
Silver Member Username: Frobi
Post Number: 187
Registered: Aug-06
|
Posted on yes to both, but it did not go upload. |
Gold Member Username: Kirankumar
Kenya
Post Number: 1499
Registered: Oct-07
|
Posted on where did you download the file from? |
Silver Member Username: Madflea168
Post Number: 225
Registered: Jan-08
|
Posted on you need to choose "software update list", not "upgrade software",
then you will see the files on the usb stick, I have one 128mb just for the pro use, and usually only keep the latest bin on it.
and confirmed the latese bin from ftatalk worked on pro and xtreme, for now, just installed. |
Gold Member Username: Kirankumar
Kenya
Post Number: 1503
Registered: Oct-07
|
Posted on good post Mad Flea,
i didn't know that |
Silver Member Username: Madflea168
Post Number: 229
Registered: Jan-08
|
Posted on I dunno the correct procedures, but I always disconnect the coax to the box before I load the new bin to be safe. |
Gold Member Username: Kirankumar
Kenya
Post Number: 1507
Registered: Oct-07
|
Posted on that is the correct procedure |