How can I set up my BEV on a VS plat ???

 

New member
Username: Troopa

Post Number: 1
Registered: Feb-08
can some one give me the steps ?
 

Silver Member
Username: Madflea168

Post Number: 220
Registered: Jan-08
pretty much the same way you set up your dn, except you need to point 82/91.
 

Bronze Member
Username: Luser

Post Number: 59
Registered: Nov-07
Without a HD reciever you only need single lnb for 91.Your probably gonna be 10deg. lower, an eight of a turn to the left, lean into it hard with some skew.Set your reciever to signal beep.Turn your tv volume up al the way. Get on the roof bump left or right up or down for highest pitch beep.Then confirm that nimiq1 is showing as sat recieved then channel scan. Done.
 

New member
Username: Papiro

Post Number: 7
Registered: Feb-08
How to set nimiq1 in pansat 3500?
 

Gold Member
Username: Kirankumar

Kenya

Post Number: 1445
Registered: Oct-07
papiro,
first set up your dish
go to www.dishpointer.com
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us