Bronze Member Username: Ariza700Markham, On Canada Post Number: 30 Registered: Feb-06 | Folks, I just bought a new notebook which does not have a serial interface to download the bin file but it does have a USB port. My question is Loader 1.06 which com port I should select ? Thx for your help in advance |
Gold Member Username: BrucesterPost Number: 1177 Registered: Jul-06 | try com port 1 if not try 2 and so on |
Bronze Member Username: Ariza700Markham, On Canada Post Number: 31 Registered: Feb-06 | Bruce, Thx for your reply. Do you know if the USB to serial adapter work with VISTA ? Thx |
Silver Member Username: DimwittPost Number: 391 Registered: Aug-06 | yes it does work, but you also need the null cable |
Bronze Member Username: Ariza700Markham, On Canada Post Number: 32 Registered: Feb-06 | Tooter, I do have a null cable and I bought an adopter(USB to Serial) today but the disk does not mention vista as an operating system. First of all do I really need to install the drivers ? do you know any adapter which will work with vista ? Thx |
Bronze Member Username: Ez2ctvPlatinum Mem... Post Number: 38 Registered: Dec-07 | You need the correct drivers Vista is kicking peoples Azz when it comes to USB to RS232 serial adapters. Most of the drivers that are included on CD with the adapters don't work worth crap in XP and even worse in Vista. I have the correct drivers for XP downloaded from http://www.ftdichip.com/Drivers/VCP.htm But I don't think they have them for Vista yet (check they are suppose to release soon) |
Silver Member Username: DimwittPost Number: 393 Registered: Aug-06 | Ariza 700, what worked was: using the installation disk that came with usb to serial cable ("cables to go" brand) and the cable was assigned com port 4.(selected port 4 on loader) connected usb and null together and started the download. *not saying com port 4 is where your usb cable is at. |
Bronze Member Username: Ariza700Markham, On Canada Post Number: 33 Registered: Feb-06 | Tooter, Did you installed the XP driver ? or do you had other options ?? |
Silver Member Username: DimwittPost Number: 394 Registered: Aug-06 | i did nothing special and i cannot remember if the usb to serial cable and disk were labeled for vista-- |
Gold Member Username: Way2smartWww.desifta.tk Post Number: 1002 Registered: Oct-06 | u can still use a xp driver with vista and it will work fine!!!! |
Gold Member Username: Way2smartWww.desifta.tk Post Number: 1003 Registered: Oct-06 | http://www.usbgear.com/computer_cable_details.cfm?sku=CA-232-1MB&cats=199&catid= 2345%2C199%2C461%2C106%2C1009%2C601 |
Gold Member Username: Way2smartWww.desifta.tk Post Number: 1004 Registered: Oct-06 | there you go the driver for vista......USB TO RS232 Converted....... click the site and number 10..... download and let me know how it goes........ |
New member Username: FatroyPost Number: 4 Registered: Nov-07 | i got a new captive work 600 s premium i downloade all the software needed and i put in the new bin 1.72 everything was done properly and i blind scanned the echo 3 (61.5 w) channels which it downloaded good.But when i play the channel it says "scrambled channel" what can it be.I had a pansat and i downloaded the bins all the time.But with this box i must be forgetting something can any one help please? |
Gold Member Username: KirankumarKenya Post Number: 1313 Registered: Oct-07 | 1234 5678, You need to start a new thread to get some help,this way you are hijacking a thread |
Gold Member Username: BrucesterPost Number: 1178 Registered: Jul-06 | 1234 5678 you need to enable the patch on the remote hit F1 000 on the tv you will see patch inable then let roll might tack up to 5 min and watch tv hope this helps you |
Bronze Member Username: MetallicaPost Number: 39 Registered: Jan-08 | my Vista working just fine with the USB..just install the cd that come with the USB and that it..open loader use com port 4..that the com port i used. |
Bronze Member Username: Master_leePost Number: 27 Registered: Oct-07 | African Why didn't you try to help the man first and then tell him that he is hijacking Ariza 700's thread? You and your friends AV, The One, bruce, and your new nicks Cubiche,and Metallica call people trouble makers when they correct your mistakes. I guess now, I am one too. (Webster) To steal from as if by hijacking. a. To stop and rob (a vehicle in transit). b. To steal (goods) from a vehicle in transit. c. To seize control of (a moving vehicle) by use of force, especially in order to reach an alternate destination. Since LK don't come around any more,this place became an open house for the spammers. BTW don't you people have enough to do at your site? |
Bronze Member Username: MetallicaPost Number: 43 Registered: Jan-08 | JOHNNY BOY why the hell is my name in there???? look up and read my only post in this thread and where i call anyone a trouble maker. |
Gold Member Username: BrucesterPost Number: 1181 Registered: Jul-06 | johnny i have only one nick and it is hard to help some one whan some one ask for help one guy is asking about Serial port vs USB and this othere guy loaded the file for the first time and did not enable the patch so he did get the ancer and he did post in anothere thread the same thing it is hard to help others and not get the one confused that asked the qustion first there is no time diferents in starting your own thread and talking some ones thread and if he would have started a new thread he might have got a ancer at 2am and not at 7am and i think had this guy read the how tos he would no what he needed to do all new cw after you get them out of the box and load the new bin you must then enable the patch to get tv to work |
Gold Member Username: BrucesterPost Number: 1183 Registered: Jul-06 | metallica that is helping this othere guy is just trying to start sh it keep up the good work matallica |