Remote not working with CS 248T

 

Silver Member
Username: Lucia

Calgary, AB

Post Number: 526
Registered: May-06
My remote is not working.. what do i do?
 

Gold Member
Username: Rtap

FL

Post Number: 1800
Registered: Jan-07
many are reporting the same problem
 

Silver Member
Username: Lucia

Calgary, AB

Post Number: 528
Registered: May-06
also... i put the right bin (Pansat remote fix)
 

Gold Member
Username: Rtap

FL

Post Number: 1801
Registered: Jan-07
reload bin again.try this
 

Gold Member
Username: Nydas

Post Number: 7894
Registered: Jun-06
Lucia: Your remote might be a 2700 remote.
1. Try removing batteries from the remote and putting them back in.
2. Try switching between P and F at the bottom of receiver if they are there.
3.Try using the jvvh BINs.

According to the jvvh_248 instructions:
"Pansat 2700 remote users still use the Jvvh_PansatRemote_248 bin.
Pansat 2500 / Fortec / Pantec Remote users will have to use the Jvvh_FortecRemote_248 bin."


The CS_248T_lightning is working fine.

All three BINs available separately from
http://public.box.net/2500_full_kit
 

Silver Member
Username: Lucia

Calgary, AB

Post Number: 529
Registered: May-06
ok. thanks, i'll try it right now.
 

Silver Member
Username: Lucia

Calgary, AB

Post Number: 530
Registered: May-06
nalin i used the bins from your kit.
but ill try thaT right now
 

Silver Member
Username: Lucia

Calgary, AB

Post Number: 531
Registered: May-06
still is not working.
 

Silver Member
Username: Lucia

Calgary, AB

Post Number: 533
Registered: May-06
nvm is working now, with the lighting bin.
 

Gold Member
Username: Nydas

Post Number: 7900
Registered: Jun-06
Install CS_242T or CS_245T. Make sure you attach to your TV and see your remote working.
The try CS_248T.

I am testing 248T right now - instead of going from jvvh file to CS file I first loaded CS_242 and then the CS_248.
I am very comfortable with uploading BINs. If you are too, I suggest loading
jvvh_208_2500to2700.bin or
j27_205_1.bin
and then loading the CS_245 - CS_248
All the files are there in the KIT.
Once on somebody else's receiver I had to do a "Revert to 2500" and then start all over again and it worked.
I find that the conversion system is immune from user inflicted punishment. It usually springs back to life.
 

Silver Member
Username: Lucia

Calgary, AB

Post Number: 536
Registered: May-06
thank you nalin, i loaded the Lighting bin from ftabins.net and its working fine now. thanks tho.
 

Silver Member
Username: Jwl1

Post Number: 109
Registered: May-06
downland jvvh 248
[link removed]

DN and Bell 100% up

This was posted by Error (user name). It works great.
 

New member
Username: Htran

Post Number: 5
Registered: Jan-08
Fixed remote problem with CS_248T. Had remote problem since 3 weeks ago. Now working awsome with this new bin. Thanks a lot Nalin.
 

Silver Member
Username: Adave

Post Number: 119
Registered: Jun-06
remote work with 248T
 

Silver Member
Username: Psychmonster

Rhodium MemberAint nuthin ...

Post Number: 689
Registered: Jul-06
if you need remote in emergency, pick up the 3500 all in one on ebay...cheap and mostly works with conv except numbers for some strange reason
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us