Thank you all in advance for assisting me. I've been trying to get the 121w setup for weeks now. I've tried everything but it seems I'm missing something. here are my setting:
LNB type Standar LNB freq 10750 22khz off diseqc #1 Legacy Sw none Skew 45 Tp 11724 ( there are many that i got from ling Sat)
I've tried Universal 1 and 2 and never got it to work. I'm using a 33" dish with a 2500 converted to 2700.
I know this sounds simplistic but angle your tv where and u can see your sat movement on tv and set it for the sat u are looking for...example 92/81 nim 1....set your disc sw at your approx settings and wave your dish ...I have my dish(s) right out side my window so it takes minutes to go from 82/91 to 110 / 119...I have a motor but am still playing with it
if you have 110/119 also, it is recommended to put 119/110/121 as 1/2/3 on the switch.
and with most of 121 moving to 118, why still waste the time on 121?
whether 118 or 121, only 10750 worked on me. you might need to adjustment the antenna little. or check your bin, because the latest bin on my vs would sometimes lost quality on some channels, I will have to reboot from the back switch in order to get it back to normal, I know I need to reload the bins again, just too lazy and with all the ecm lately, I will just wait till next fix.
LNB type Standar LNB freq 10750 22khz off diseqc #1 Legacy Sw none Skew 45 Tp 11724 ( there are many that i got from ling Sat)
With that setup and 119/110 on the DisEqC as well, you are probably scanning Echo 7 on port 1 with a LNB Freq of 10750. That is not going to work well for Echo 7 and that is not your intention either.
Yokon has given right advice regarding your settings for LNB freq and first tp, which is as above and not to be altered. However, consider using Dishpro and LNB Freq 11250 with 119/110/121 to DiseqC 1/2/3. Depends on your dish.
Madflae has given the right advice for the disEqC switch settings. In most cases, 119/110/121 are preset to 1,2,3 and you have to have it so in your antenna setup. 1/2 for 119/110 and 3 for 121. You should consider 118.7 at some stage of the game.
Psychmonster has a good long term suggestion. Sada is way out and African and Doreen are right if you have DishPro.
Post Number: 3 Registered: Feb-08 Posted on Friday, February 01, 2008 - 01:28 am:
-------------------------------------------------------------------------------- By the way, I get the 110 and 119 with no problems, it is just the 121.
The man is only asking for help on Echo 9 @121 Linear Polarization, Local Oscillator Frequency 10750 GHz
I have no issues with 110 and 119, but this is what I gathered from all of your responses.
My settings are right, ** LNB type Standar LNB freq 10750 22khz off diseqc #1 Legacy Sw none Skew 45 Tp 11724 **
I will try to find those channels at 118 since most of them were moved to there by using 10750 AND NOT 11250.
I don't have dishpro, but I know i get 110 and 119 from port 4 and 121 from port 1. since I only have 2 LNBs attached to the dish.
Thank you, again, for your support. This might be the first time I start a discussion but I've been using this form for years and found answers by reading and going through past discussion. I know each one of you who are always there for us and I really appreciate what you guys do.
Remy you have a twin LNB for 119/110 using two adjoining ports with one port setting. The next adjoining after 4 is 1.
The whole of North America uses Port 1/2 for 119/110.
You say you read everything. I cannot understand the reasoning behind insisting on using port 1 for 121W after reading everything. Which forum or which Guru advised you to use port 4 for 119/110 and port 1 for 121? Do you know that in most DiseqC switches, Port 1 and port 4 are on each side of the output connection in the middle and it is easy to forget which is which?
Best wishes. Let us know when you have changed your settings and all three are working.