Pansat 2700a

 

New member
Username: Lil2sent_up

Post Number: 6
Registered: Dec-07
hi
i need help with downloading a bin file to my receiver.
what gtrom version would i use? there are so many and im using pansat 2700a b-75.
When i tried to download the 245 bin file, i keep gettting all these error messages.
can someone help me plz?
Thanks!
 

Bronze Member
Username: Cubiche

CUBA, CUBA

Post Number: 29
Registered: Jan-08
1-cable rs232 null modem
2-v27.02
3-have loader open with bin ready turn rear switch on when you see the first light on lcd panel hit down load.
4-scan your channels
5-do a hard reboot(turn rear switch off to 2 to 4 minutes then turn on)

6-check your settings in antenna setup
7-enjoy tv

all available at crazyfta .com
 

Gold Member
Username: Nydas

Post Number: 7726
Registered: Jun-06
I hope you are 100% sure it is a genuine Pansat 2700a and are attempting to load
x-87bl_080126_b75_245_api(test).bin
after unzipping and extracting from the zipped file you downloaded.

Get the Loader 27.02 from

[link removed]
 

New member
Username: Lil2sent_up

Post Number: 7
Registered: Dec-07
i did all that...but how long does it take it to download the file?
 

Bronze Member
Username: Cubiche

CUBA, CUBA

Post Number: 31
Registered: Jan-08
depending on your computer,or internet.
 

Bronze Member
Username: Cubiche

CUBA, CUBA

Post Number: 32
Registered: Jan-08
i love that nalin pushes her site,but attacks others for doing the same.
 

Gold Member
Username: Nydas

Post Number: 7728
Registered: Jun-06
CUBICHE: I expect that you will refer to me as he and not she.
The sites I mentioned are three very old established sites.
The first two are stated to be original Pansat sites.
None of them are "my sites"
 

Bronze Member
Username: Cubiche

CUBA, CUBA

Post Number: 33
Registered: Jan-08
NALIN shhit i thought you were a female LOL.the fact of the matter is you attack people when they post to people were to get the files,yet you spam your fta site when you can.
 

New member
Username: Lil2sent_up

Post Number: 8
Registered: Dec-07
Do we have to remove old bins from the receiver? i saw it on some forum...and dont know if we have to do that and how.
 

New member
Username: Lil2sent_up

Post Number: 9
Registered: Dec-07
plus im using it as a usb port on a laptop...i wonder if that makes any difference??
 

Gold Member
Username: Kirankumar

Kenya

Post Number: 1163
Registered: Oct-07
Lily,
that usb port will give you a lot of problems.
do you have access to a desktop computer?
 

Silver Member
Username: Dimwitt

Post Number: 386
Registered: Aug-06
It will take several minutes to load bin with the null cable and the usb to serial cable


old bins get replaced with new bins --don't need to do anything with the old bin.
 

New member
Username: Lil2sent_up

Post Number: 10
Registered: Dec-07
i do not have access to a desktop computer...
i was also wondering do i have to go to control panels to set up the com ports?
 

Bronze Member
Username: Cubiche

CUBA, CUBA

Post Number: 34
Registered: Jan-08
GO TO DEVICE MANAGER RIGHT CLICK
 

New member
Username: Martha1111

Post Number: 1
Registered: Jan-08
hi
i need help with downloading a bin file to my receiver pansat 2700e
when the download is finish There is no numbers that appear only the word ON appears I cant go on menu or anything do you think the machine is burn

Merci de bien vouloir maider . Thanks
 

Silver Member
Username: Jagr1234

Post Number: 177
Registered: Nov-07
its broke martha. throw it out and get a new one.
 

Bronze Member
Username: Cubiche

CUBA, CUBA

Post Number: 36
Registered: Jan-08
MARTHA SIMPLE CONNECT RECEIVER TO TV .IT WILL DISPLAY LANGUAGE HIT OK BUTTON ON REMOTE SELECT LANGUAGE THEN SCAN YOUR BIRD.
 

New member
Username: Martha1111

Post Number: 2
Registered: Jan-08
thanks dickfoil should I buy a pansat or viewsat


MERCI...
 

Silver Member
Username: Jagr1234

Post Number: 178
Registered: Nov-07
id buy an nfusion. its good you asked and didnt waste any more time on this broken recvr of yours.

its easier to just throw them out and start over.
 

New member
Username: Martha1111

Post Number: 3
Registered: Jan-08
cubiche thanks I did what you told me and at least I got to scan it blind scan but did not work. before the screen was black now its satellite image. I see the channel numbers but no image should I install the bin again...
thanks
 

Silver Member
Username: Jagr1234

Post Number: 179
Registered: Nov-07
just throw it out....martha

you ask for advice and then dont take it....your wasting time. throw it out and start over with a new one.

come on
 

Gold Member
Username: Kirankumar

Kenya

Post Number: 1165
Registered: Oct-07
martha '
install the bin again
 

New member
Username: Martha1111

Post Number: 4
Registered: Jan-08
merci guys its working again its not that I dont want to take your advice dickfoil its just the money ...

Thanks again My mom is very happy she can watch her novelas...
 

Gold Member
Username: Kirankumar

Kenya

Post Number: 1166
Registered: Oct-07
enjoy
 

Bronze Member
Username: Mcrabbycabby

Wpg, Man Canada

Post Number: 42
Registered: Jun-06
nalin your the best i'll always listen to your advice for my pansat clone thank you.
 

Gold Member
Username: Nydas

Post Number: 7742
Registered: Jun-06
Martha: Presuming that you are 100% sure that you have a genuin Pansat 2700

Install B75 afresh.
Then install BL BIN 245
Unzip before using.
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-
[link removed]

Here is the newest factory bin out for the b75 upgrade. Loader v27.02 is also included in the zip file.
Attached Files
2700A(b-75)_121_api_1 factory bin.zip (436.4 KB)

x-87bl_080126_b75_245_api Bev Fixed and DN

from BL and bev is working on this bin after the ecm and DN is also working
Attached Files
x-87bl_080126_b75_245_api.zip (430.0 KB)
*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*-*
The above files are also available at:
http://www.future-fta.info
http://www.al7bar*tk

and many other fta sites.
 

Bronze Member
Username: Joonkadanmon

Philadelphia, Pa Usa

Post Number: 48
Registered: Sep-07
good evening guys, I have a pansat 2700A was working fine, problem is I bought a new conmputetr and it has all USB ports, I bought RS 232 USB to serial converter and now nothing loads am unable to download new bins etc. it seems am even having problems with unzipping stuff, dont know what am doing wrong. Please help?!
 

Gold Member
Username: Nydas

Post Number: 7754
Registered: Jun-06
Zip/Unzip software: http://www.winzip.com
USB to serial: There have been about 50 thread on this subject in this forum alone.
1. Buy only if there is aninstallation CD.
2. do not allow XP to automatically install.
3. Use manual installation with CD.
4. Check Device Manager and make sure your new device has COM1, COM2, COM3 or COM4. This instructions has already been mentioned earlier ever in this thread.
5. Cable for Pansat 2500/FLU is Straight serial RS232.
Cable for Pansat 2700 is Null modem serial.
Both these cable end up with 9 pin Female end for your receiver.
6. If you are not sure if your cabling is straight RS232 or Null modem, it is easy to buy a DB9 M/F null modem Adaptor and use it in series with the rest of cabling. That way you get one type with the adaptor in and the other type without the adaptor.
 

Bronze Member
Username: Ozziejatt

Post Number: 55
Registered: Nov-06
Nalin, i know you are an expert at this please advice:
if i have to reinstall software on Pansat 2700a i mean completely wipe out and reinstall all software what do i do and what do i need?
That means do i need b75 boot file and current file only or some other file as well?
 

Bronze Member
Username: Cubiche

CUBA, CUBA

Post Number: 64
Registered: Jan-08
oz if you did not like my advice i won't help you again
 

Gold Member
Username: Nydas

Post Number: 7768
Registered: Jun-06
OzJatt :
Look at my post above on Tuesday, January 29, 2008 - 11:33 am:
 

New member
Username: Carburante

Post Number: 3
Registered: Jan-08
hey CUBANO nd Nalin. i got from a friend who moved out an old kusat 2600 which is a clon of digiwave. i know that the support for this box is rare so my question is if can i convert this old lady to a new ( cools*t or other type). i saw that some people are converting digiwave diamond to cools*t.

tku both in advanced 4 ur reading and tips.
viva cuba without the crazy beardman!!!!!!!
 

Bronze Member
Username: Cubiche

CUBA, CUBA

Post Number: 65
Registered: Jan-08
carburo ve a crazyfta .com y preguntale a RTAP.EL TE PUEDE AYUDAR.
 

New member
Username: Carburante

Post Number: 5
Registered: Jan-08
gracias asere
 

New member
Username: Celmario

Post Number: 4
Registered: Dec-06
Hi guys. Can anyone help me with my Pan 2500a?Have converted it to 2700a I think .Getting a display that reads:b-7-5 from left to right when I turn it on.Then it says on and then goes to channel.Im sure theres another file I must use now but had no luck finding it?Any help much appreciated.Thank you in a advance.
 

Gold Member
Username: Dude123

Www. CrazyFTA .com

Post Number: 1986
Registered: Jul-06
are you talking about B3V or DN? and go to your system info from menu and let me know what it says in there
 

New member
Username: Celmario

Post Number: 5
Registered: Dec-06
Hi Im trying to get back with DN.System info reads- <--JvvH5897 X-87BL API:75.2.05_Eubx Boot ver:75.Now Im starting to think I did this upgrade wrong anyway.
 

Bronze Member
Username: Devenw

MISIS

Post Number: 59
Registered: May-06
john i,m having same problem.
Let me know if you find any fix.
 

Silver Member
Username: Aanaa

Post Number: 218
Registered: Mar-05
Is Bell working for pansat ? with 246 bin
 

Silver Member
Username: Way2smart

DESIFTA .co.nr

Post Number: 855
Registered: Oct-06
nope....... ithink....
 

Silver Member
Username: Way2smart

DESIFTA .co.nr

Post Number: 856
Registered: Oct-06
only viewsat,cw,sv are up.....
 

Silver Member
Username: Way2smart

DESIFTA .co.nr

Post Number: 857
Registered: Oct-06
only viewsat,cw,cs are up.....
 

Silver Member
Username: Way2smart

DESIFTA .co.nr

Post Number: 858
Registered: Oct-06
sorry viewsat,cw,cs are up.....
 

Silver Member
Username: Dimwitt

Post Number: 387
Registered: Aug-06
Way2smart-- the above posts confirm ura idiot.
 

Gold Member
Username: Nydas

Post Number: 7821
Registered: Jun-06
John Poulicakos : You did the right thing. You are a confirm convert. To get full DN, you use the latest BIN jvvh_245 or CS-245 or Jvvh_246. You can't get BEV right now.
There are two types of jvvh BINs - for Pansat Remote or for Fortec remote. Choose the right one.

The BINs are available at
[link removed]
http://www.crazyfta*com
http://public.box.net/2500_full_kit

Download the kit and unzip in a new jvvh directory. Read the Instructions file. Or just download the 245 or 246 files.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us