Help me /?????

 

Bronze Member
Username: Sub33

Post Number: 14
Registered: Jan-08
need help with vs ultra
 

Bronze Member
Username: Sub33

Post Number: 15
Registered: Jan-08
how do you put new files in vs ultra
 

Gold Member
Username: Nydas

Post Number: 7359
Registered: Jun-06
Buy yourself a USB drive at Radio Shack or FutureShop.
Download the BIN dated 17th January onto your computer and unzip the file into your USB drive.
Take USB drive to your receiver and insert it in the slot.
Click on Menu on your remote and install from USB drive.
 

Bronze Member
Username: Sub33

Post Number: 16
Registered: Jan-08
step by step with serial cable
 

Gold Member
Username: Nydas

Post Number: 7363
Registered: Jun-06
Go to
[link removed] and get the instructions for serial load.
 

Bronze Member
Username: Sub33

Post Number: 17
Registered: Jan-08
can't get page pop up??????
 

Bronze Member
Username: Sub33

Post Number: 18
Registered: Jan-08
(((((???????)))))))
 

Bronze Member
Username: Sub33

Post Number: 19
Registered: Jan-08
can some one tell me step by step how to put files in vs ultra with serial cable
 

Bronze Member
Username: Merk

Post Number: 63
Registered: Dec-07
http://www.ftatech.net/files/
 

Bronze Member
Username: Sub33

Post Number: 20
Registered: Jan-08
that tell me a lot.
 

Bronze Member
Username: Merk

Post Number: 64
Registered: Dec-07
click were it says support file listed next to your receiver it is a download link with all info how to and software everything you need!!!!!!!!!
 

Bronze Member
Username: Merk

Post Number: 65
Registered: Dec-07
thanks to the fta tester


#1 BEFORE you disconnect your receiver from the TV make a note of ALL antenna settings for every Satellite you can receive. You could do this ANYTIME so its done. I have it all in nice text DOC in my computer.

#2 Download the new bin from the "home" forum for your receiver. Never pay for free info. Unzip the file and place it inside a folder on your computer named "new bin 12-03-09 or whatever the date is.

#3 Go to Viewsatusa.com or wherever on the nett you can get one and get a FRESH UPDATED copy of the satfile. Place this file inside that folder you made today.

#5 Use the Loader Program or USB drive to copy the channnel list FROM your receiver to the computer. Place that file indise the folder you made today.

#6 Use the loader Program or USB drive to install the new bin, satfile, and Channel List from the folder you made today.

#8 Connect your receiver back to TV, LNB and whatever else you normaly do.

#9 Using you notes make sure all settings are the same as before in each satallite you can receive in antenna settings.

#10 Turn it to a sat and if need be let it autoroll. Sometimes this step takes 3 min sometimes 10. If you interrupt it by changing channels it will take longer so just let it roll.

#11 Watch tv. Be thankfull it works.

#12 After using the receiver for a while go to the "home" forum for you receiver and report any Bug's or thank the coders for their hard work.

To make a backup using the loader program

Connect your receiver to both a tv and computer.

hit menu, system Information, Receiver upgrade, go down to satellite and hit ok.....a process bar will appear then start the loader program on the host computer and hit the STB-PC button...

repeat for the channel list

make a folder on your desktop and dragg the files to it so you can find it later

now you have backups!
Upload


Yes their are a few extra steps here than what some people will say do they do but when these steps are done they save ALOT of time and energy fixing trouble after a data loss. I have 17 sat's scanned with 2700 channels it would take me about 5 hours to get everything back the way I like it. I am sure others will jump here and say stuff like "I never do all that and I never have troube" That is fine I am just saying if you do this you will not have trouble due to data loss or settings being wrong. It takes me about 5 min to do this each time so its not a big deal.

Upload


Loader2 User Guide

"Loader2" can download the firmware from PC to STB.

1. Install "Loader2" to your PC.
2. PLUG OUT YOUR STB FROM OUTLET.
3. Connect "NULL MODEM CABLE" between PC and STB.
4. Run "Loader2" on PC.
5. Run the "Tool->Configuration" menu and select serial port what you use.

6. Press "Open File" button and select the file what you want to download.
7. And then press "PC->STB" button.
WHEN ZMODEM WINDOW IS APPEARING, PLUG IN YOUR STB.


8. Then selected file will download from PC to STB.

9. When download is complete, you can see below message.
When you see this dialog on PC, STB will start to write flash memory.
Please wait until STB automatically reboot.


Upload


Viewsat HOME SITE: ????? some confusion here !!!!


Future FTA - PANSAT HOME SITE:
[link removed] (C00LSAT Nfusion and All receivers)

DSS Newbies:
[link removed]

Ariza
[link removed]

CaptiveWorks
[link removed]

FTA
[link removed]
http://www.lyngsat.com/america.html
http://ekb.dbstalk.com/dishlist.htm ( unofficial DN channel list
 

Bronze Member
Username: Sub33

Post Number: 21
Registered: Jan-08
can i get my vs to work on a 6' foot dish
 

Bronze Member
Username: Sub33

Post Number: 22
Registered: Jan-08
[?????????......'
 

Bronze Member
Username: Sub33

Post Number: 23
Registered: Jan-08
come on some one tell tell me can i use a 8 foot dish on my vs
 

Silver Member
Username: Bill038

Post Number: 449
Registered: Sep-06
I thought it was a 6 foot
 

Bronze Member
Username: Sub33

Post Number: 24
Registered: Jan-08
ok 6 foot or 8
 

Bronze Member
Username: Sub33

Post Number: 25
Registered: Jan-08
can i get direct tv on my vs i'm on nimiq 1.3
 

Bronze Member
Username: Sub33

Post Number: 26
Registered: Jan-08
.............????????????..........
 

Gold Member
Username: Pulp_fiction

Post Number: 1123
Registered: Nov-07
can i get direct tv on my vs i'm on nimiq 1.3

.............????????????..........


NO
 

Bronze Member
Username: Sub33

Post Number: 31
Registered: Jan-08
I think i purchse vs clone .How can i tell the
 

Bronze Member
Username: Vikdamone

Post Number: 47
Registered: Jan-08
it puts the lotion on its skin or it gets the hose again
 

Gold Member
Username: Rtap

FL

Post Number: 1754
Registered: Jan-07
I THINK YOU ARE CLUELESS
 

Bronze Member
Username: Sub33

Post Number: 32
Registered: Jan-08
I 'ed like make clone.I have a mother bored and a vs box Be back later.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us