Box turning off by itself

ramiro gonzo Bronze Member Username: Mdl97 Post Number: 74 Registered: Jan-06	Posted on Monday, January 07, 2008 - 01:38 GMT my viewsat extreme has turned off by itself twice today,and it turns itself on again.any idea was is going on?
sada Gold Member Username: Saqeeb9000 Post Number: 1419 Registered: Oct-07	Posted on Monday, January 07, 2008 - 01:56 GMT try to turn off autoroll see if it works.. make sure the bin you downloaded is from norw group and from trusted website..
ramiro gonzo Bronze Member Username: Mdl97 Post Number: 75 Registered: Jan-06	Posted on Monday, January 07, 2008 - 01:58 GMT downloaded the bin from dssfeedback.com.been getting it from there for a while now.
juan Cavazos Silver Member Username: Silver1123 Mexico, DF Mexico Post Number: 428 Registered: Jul-07	Posted on Monday, January 07, 2008 - 03:31 GMT Auto reset happens sometimes with new bins. For example, same problem happened with koolsat 4000, 5000, 6000 with bin Norw158, resets every now and then. Do a reset from the back switch, and wait for new bin for permanent solution
scabz Silver Member Username: Scabz Knoxville, Tn Us Post Number: 263 Registered: Oct-07	Posted on Monday, January 07, 2008 - 03:36 GMT My vs lite did that yesterday but only once.
RTAP Gold Member Username: Rtap FL Post Number: 1577 Registered: Jan-07	Posted on Monday, January 07, 2008 - 16:03 GMT people are stating the same problem.hope new bin corrects this issue
Tina Chick Silver Member Username: 1tina_chick Post Number: 161 Registered: Mar-06	Posted on Monday, January 07, 2008 - 20:36 GMT Same problem here KooL 4 P crashing often ( 3 or 4 times a day ) + No Information in Guide - Other than that 100% up and Strong
David Beckham Bronze Member Username: Ptaha Post Number: 51 Registered: Aug-07	Posted on Monday, January 07, 2008 - 22:12 GMT i had that happen with my receiver as well vs xtreame
Nalin Nyda Gold Member Username: Nydas Post Number: 6899 Registered: Jun-06	Posted on Tuesday, January 08, 2008 - 00:56 GMT 1. Turn autoroll off 2. Turn autoTP off 3. Turn closed caption off. 4. Make sure the date/time setup is correct.

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us