Problem whith cable USB to RS232
|
Bronze Member Username: Chichos26Canada Post Number: 11 Registered: Dec-07 | I have this cable http://images.google.ca/imgres?imgurl=http://serialio.com/images/products/USB-RS 232-Cable-med-wm.jpg&imgrefurl=http://serialio.com/products/adaptors/usb_serial_ WinDesk.php&h=281&w=274&sz=15&tbnid=elKSCnrFm38I4M:&tbnh=114&tbnw=111&prev=/imag es%3Fq%3Dusb%2Bto%2Brs232%26um%3D1&start=1&sa=X&oi=images&ct=image&cd=1 when i try download the bin my PC don't have comunication whith the satellite |
|
Gold Member Username: RunnerguyPluto Post Number: 1005 Registered: Sep-06 | What CABLE to use with various FTA makes? Here is a list of the most popular receivers on the market and the cable needed to program them. Ariza Ultra 400/500- Null Astrovox 2600-Straight DB9 Blackbird and all Blackbird clones(BOB, Max 1000, Stealth II, MS1000, ,etc.)-Null Co0lsat 4000 Plus-Null Co0lsat 4000 Pro-Straight DB9 Cooltec-Null Coship (All)-Null Digiwave 6800/7000-Null Digiwave Diamond-Straight DB9 Dreambox (All)-Null Fortec lifetime-Straight DB9 Fortec Lifetime Ultra-Straight DB9 Lava 2600-Null Max 2500-Null ****sat (All)-Straight DB9 Microroyal (All)-Null Pansat 2300a/2500a and all clones-Straight DB9 Pansat 2700-Null Pansat 3500-Null Pansat 5000HC-Null(Also can program through USB) Pantec/Multistar Max (All)-Null Pantec/Multistar MS (All except MS1000)-Straight DB9 Pantec MX/Ultra-Straight DB9 Rex1-Null Silver bullet/ST 1000/2000-Null Skyview 500-Straight DB9 Spacestar DVB500-null Stealth 2000a-Null Ultrastar 5000-Null Viewsat VS2000-Null List of Popular Receivers Firmware Cable NULL MODEM CABLE (Cross over ) * Ariza Ultra 400/500/700/750/800 & Extreme - Null modem cable * Blackbird and all Blackbird clones(BOB, Max 1000, Stealth II. MS1000, ,etc.)- Null cable * Bluejay 1 & 2 -Null modem cable * Buzz S2010F - Null modem cable * Captive Works 1000s (CW500s,CW600s, CW600s Premium) - Null * Co0lsat 4000 Plus-Null * Cooltec ( Clones only ) - Null * Coship (All)-Null * Digiwave 6800/7000-Null * Dreambox (All)-Null * ExtremeView Magnam XV3300 - Null * Koolsat/Sonicsat (clone) - Null * Kusat Pro 2600a - Null * Lava 2600-Null * Max 2500-Null * Microroyal (All)-Null * Neusat SP6000 ( SP6000 Premium ) -Null (Also can program through USB) * Orasat v5- Null * Pansat 2700-Null * Pansat 3500s/sd - Null Cables - (Also SD Memory Card) * Pansat 5000HC-Null modem cable(Also can program through USB) * Pantec/Multistar Max (All)=Null * Rex1-Null * Silver bullet/ST 1000/2000-Null * Skyview RX600 - Null * Spacestar DVB500-Null * Stealth 2000 * Techsat - Null * Ultrastar 5000-Null * Viewsat VS200- NULL -------------------------------------------------------------------------------- -------------------------------------------------------------------- STRAIGHT THROUGH CABLE ------------------------------ Astrovox 2600-Straight through DB9 Co0lsat 4000 Pro/5000Pro/5000Platinum/6000Premium-Straight DB9 Cooltec ( Non Clone ) -Sraight through DB9 Digiwave Diamond-Straight DB9 Fortec lifetime-Straight through DB9 Fortec Lifetime Ultra-Straight through DB9 lava 3200- straight through db9 Megasat (All)-Straight through DB9 Pansat 1500a/2300a/2500a and all clones-Straight DB9 Pantec/Multistar MS (All except MS1000)-Straight through DB9 Pantec MX/Ultra-Straight through DB9 Skyview 500-Straight through DB9 Andy |
|
Bronze Member Username: Chichos26Canada Post Number: 12 Registered: Dec-07 | If I have a clone pansat 2500 to 2700 wich I need??? |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2919 Registered: Sep-06 | wow zulu what a answer... what is your receiver their rafael? What os is your pc? |
|
Bronze Member Username: Chichos26Canada Post Number: 13 Registered: Dec-07 | and I need a USB cable to DB9 |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2920 Registered: Sep-06 | the same as for a pansat 2500 a straight so I am thinking that adapter will not work out for you let me see hang on... please answer my question above while i go look |
|
Bronze Member Username: Chichos26Canada Post Number: 14 Registered: Dec-07 | I have XP p sp2 but is a new motherboard i have only USB |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2922 Registered: Sep-06 | you will need to find a older computer and use it with a str8 serial cable in order to get that old receiver to work mabee... NFUSION is up and running now |
|
Bronze Member Username: Chichos26Canada Post Number: 16 Registered: Dec-07 | man... is that the only solution |
|
Gold Member Username: NydasPost Number: 6695 Registered: Jun-06 | 1. A Pansat 2500/FLU converted to 2700, is still physically a Pansat 2500 and will use a straight RS232 cable. 2. USB to serial cables should always be bought with an installation CD which allows you to bypass Windows XP automatic installation - and you install drivers provided with the device. 3. Go into Device Manager of computer and set the Com port to 1 (or 2) and use the loaders oftware accordingly. |
|
Bronze Member Username: Chichos26Canada Post Number: 17 Registered: Dec-07 | I have to set Com port 1 0r 2 ????? |
|
Gold Member Username: NydasPost Number: 6697 Registered: Jun-06 | Most loaders deafualt to COM port 1, but this can be changed to COM 2. Some may allow changing to COM 3 or COM 4. |
|
Bronze Member Username: Chichos26Canada Post Number: 18 Registered: Dec-07 | I tried... and don't work look I have a USB cable to RS232 *USB port to PC *RS232 port to cable Ariza Ultra 400/500- Null (I have a ariza 700) *Ariza Ultra 400/500- Null to satellite and dont work... I need an other cable???? |
|
Gold Member Username: NydasPost Number: 6698 Registered: Jun-06 | I gave requirements - No 2 and 3 in my post. You must satisfy those requirements. 4. If you are not sure about cable, always have a DB9 M/F null adaptor handy. Then you can have the adaptor in series to create the pinout opposite to without it. |
|
Bronze Member Username: Chichos26Canada Post Number: 20 Registered: Dec-07 | yeah man I do all that no 2 an No 3 I have the 2 cable a DB9 M/F null and usb to RS232 but my computer have only USB port |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2926 Registered: Sep-06 | can that usp adabter be made to work like a str8 cable? |
|
Bronze Member Username: Chichos26Canada Post Number: 24 Registered: Dec-07 | you are the expert |
|
Silver Member Username: ExtremexPost Number: 116 Registered: Nov-07 | The cable will work fine. Just plug what ever cable Null/or straight between that and the STB. You will need to have drivers installed for the usb adapter and need to know which com port windows assigns to it. That can be seen in device manager. |
|
Bronze Member Username: Chichos26Canada Post Number: 25 Registered: Dec-07 | yeah man I do all that.... The cable is in the com2 the loader com2 and don't work I have this message can't open serial port |
|
Bronze Member Username: TexmanPost Number: 30 Registered: Dec-07 | try this rafeal--->once u have your correct settings with com port and drivers...turn off stb...start your loader application with new bin start downloading procedure and THEN turn on STB..thats the only way i could get my usb cable to work properly with my viewsat.. hope that helps out.. |
|
Bronze Member Username: TexmanPost Number: 31 Registered: Dec-07 | which drivers did u load for USB cable dont use XP drivers..i would use drivers from manufactuer site.. try reinstalling proper drivers.. |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2929 Registered: Sep-06 | REBOOT the host computer |
|
Bronze Member Username: Chichos26Canada Post Number: 28 Registered: Dec-07 | I use the com4 and loader which com4 and now work thanks thanks |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2930 Registered: Sep-06 | cool save your penny's and get a Nfusion |
|
Bronze Member Username: Chichos26Canada Post Number: 30 Registered: Dec-07 | what is Nfusion???? |
|
Bronze Member Username: GrearzPost Number: 12 Registered: Jul-06 | Hey man, usb to serial is tempormental on some devices. I got mine working with a pansat 2700 that i had but the data transfer took an hour, VERY SLOW. You cn go into device manager and click proerties of the com port the device installed as and try to change it there. I did some t and s for nascar and we used laptops with no serial for our amb tansponder box. we had to use two laptops and a y serial cable for fault tolerance as from time to time they would be unstable and stop working. never seen a usb to serial device 100 percent reliable yet. |
|
New member Username: Fry22Post Number: 1 Registered: Dec-07 | hi i am new to all this and have not had to due this because my x used to do it for me. can anyone help a girl in distress please. i have a pansat 2700a i have tried for several days to upload a new bin. i downloaded a blacklist 1.4 loader and the new 235 bin but when i press bin the file is not rec. when i press all file it loads into the loader but then will not load because it is telling me it does not rec. the file. please anyone thanks |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics