NO SIGNAL ON PANSAT 3500

Sarina New member Username: Sarina_1 Post Number: 4 Registered: Dec-07	Posted on Friday, December 28, 2007 - 19:13 GMT can somebody help me with this one? I am very new to those kinds of problems and no idea what should I do next?? I've loaded last new bins but I do not get any signal on my receiver. I've deleted all channels and tried to scan everything all over again. When I'm scanning level shows:89% and quality: 0%. At the end I get the message: no 0 channels found. Can somebody help me with this one pls? thanks!!!
THE FTA TESTER Gold Member Username: Ke5aqn IF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2659 Registered: Sep-06	Posted on Friday, December 28, 2007 - 19:16 GMT we can help what is your setep? what is connected to the receiver? lnb's, switch, antenna, other receivers?
Sarina New member Username: Sarina_1 Post Number: 5 Registered: Dec-07	Posted on Friday, December 28, 2007 - 19:25 GMT there are lnbs and DiSEqC 4x1 it always worked until last week when I got that message: no signal
THE FTA TESTER Gold Member Username: Ke5aqn IF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2662 Registered: Sep-06	Posted on Friday, December 28, 2007 - 19:42 GMT what lnb's ? are they dish pro? if everything worked then it changed then SOMETHING changed. Study antenna settings make sure nothing is diferant now than was before.....might be a bad switch now
Sarina New member Username: Sarina_1 Post Number: 6 Registered: Dec-07	Posted on Friday, December 28, 2007 - 19:47 GMT I have not change anything with the antenna setting, I've also tried without switch, with one lnb only and also couldn't scan any channels
THE FTA TESTER Gold Member Username: Ke5aqn IF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2667 Registered: Sep-06	Posted on Friday, December 28, 2007 - 19:59 GMT again, what is the lnb's?
Sarina New member Username: Sarina_1 Post Number: 7 Registered: Dec-07	Posted on Friday, December 28, 2007 - 20:11 GMT I got VIEWSAT VSLNBC and on my antena set up screen shows: LNB TYPE: STANDARD LNB LOCAL-FREQ: 11250
judy santos New member Username: Judite Post Number: 1 Registered: Dec-07	Posted on Friday, December 28, 2007 - 20:15 GMT can anyone tell me if there is a new bin for pansat 3500. Thank you.
judy santos New member Username: Judite Post Number: 2 Registered: Dec-07	Posted on Friday, December 28, 2007 - 20:16 GMT Can you give me a few sites where I can get the new bin when it comes out for pansat 3500
me ta Silver Member Username: Tale Post Number: 113 Registered: Sep-07	Posted on Friday, December 28, 2007 - 20:20 GMT ~~http://www.future-fta.info/Forums/~~

« Previous Thread Next Thread »

Main Forums

Forum Help

Follow Us