Help i toasted my vs ultra

 

New member
Username: Ralphie27

Post Number: 3
Registered: Dec-07
i powered off my vs ultra while loading dec26 bin, it froze for some reason, now i get 4 dashes across and cannot load factory file, loader just sends and resends but box does not pick it up, any ideas, am using rs232 cable same as for c**lsat bin uploads
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 2529
Registered: Sep-06
your ok please read this thread i just helped a guy with same problem fallow all my instructions i made for him....

https://www.ecoustics.com/electronics/forum/home-video/425018.html

after you get done doing all that let me know the results here not in his thread thanks
 

New member
Username: Ralphie27

Post Number: 4
Registered: Dec-07
thanks fta, on the loader program, i am getting status sending ZRQINIT and then resending ZRQINIT, the status bar just stays at 0 % how long should i be waiting, i am wondering if my cable is not doing the job
 

Bronze Member
Username: Vic123

TorontoCanada

Post Number: 37
Registered: Jul-06
lol same problem here ralph casem
 

New member
Username: Ralphie27

Post Number: 5
Registered: Dec-07
whoops, sorry fta, i was using my c**lsat cable, i grabbed the vs cable that was in the box, and now we are getting action, thank you my friend! :-)
 

New member
Username: Ralphie27

Post Number: 6
Registered: Dec-07
everything works, i only needed to load factory bin and then downloaded dec.22 bin via usb port, probably won't bother with dec.26 bin for now, dn is good enough for time being, thanks
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 2537
Registered: Sep-06
coolness Ralph!
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us