|
New member Username: Koolkuttu87Post Number: 1 Registered: Dec-07 | i have a viewsat extreme which is loaded with the latest bin file and everything was working fine till last nite. now the cannot see any channels, everythings gone black..n the quality bar beside the signal bar doesnt show any activity as in there r no bars appearing in it..the signal is fine. moreover, when i access the menu>installation>antenna setup..i cant get thru even after entering the password n everthing..i dont knw was hppning..ne help will be appreciated..thanx |
|
Bronze Member Username: LolPost Number: 89 Registered: Sep-06 | Have you turned off the switch in the back ( hard reboot) and tried it ? |
|
New member Username: Koolkuttu87Post Number: 2 Registered: Dec-07 | Hey Paul, thanks man, tried the hard reboot..works like a charm.. |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2473 Registered: Sep-06 | I would say....if the reboot does not help reinstall the factory bin, then the latest bin from total, install the new satfile from viewsatusa.com....adjust the antenna settings, and scan every sat you can receive... a nice guide https://www.ecoustics.com/electronics/forum/home-video/424720.html |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2475 Registered: Sep-06 | ok good i am glad it worked out make some time while it is working good to make a backup of your channel list |
|
New member Username: Koolkuttu87Post Number: 3 Registered: Dec-07 | thanx for the guide FTA TESTER..but wat do u mean by backup of channel list?? |
|
Gold Member Username: Ke5aqnIF I DONT KNOW THE ANSWER, I WILL FIND... Post Number: 2478 Registered: Sep-06 | use the loader to upload the list to your computer |
|
New member Username: Koolkuttu87Post Number: 5 Registered: Dec-07 | thanks for the quick replies..u guys are amazing! |