Manually edit keys on CW600's

 

Bronze Member
Username: Manusharma

Post Number: 22
Registered: Jun-06
I just loaded the new bin 1.56 and trying to edit the keys manually but cannot find the "Edit Key" in the menu anywhere...
can some one guide me

thanks
 

Silver Member
Username: Way2smart

Http://www.dssworld.co..., Zeeshan Ashiq DssWorld Mod...

Post Number: 392
Registered: Oct-06
it should auto roll it self
 

Silver Member
Username: Way2smart

Http://www.dssworld.co..., Zeeshan Ashiq DssWorld Mod...

Post Number: 393
Registered: Oct-06
A. Go to Menu.
B. Go To Accessories.
C. Go down to Key Menu.
D. Press Left Arrow Once to show "NAGRA2" on top of screen.
OFF LIMITS:
Go down to 00 09 01 section 80 is Key 00, or Key 86.
Press Green Button. Enter new Key 00/86 there.
Go down to 00 09 01 section 90 is Key 01, or Key 96.
Press Green Button. Enter new Key 01/96 there.
 

Bronze Member
Username: Manusharma

Post Number: 24
Registered: Jun-06
i do not have a Key Menu in the Accessories...its very strange..but i dont...have triple checked it..

will leave it on for whole night to see if its autorolls

thanks
 

New member
Username: Whynot

Post Number: 1
Registered: Dec-07
Manu Sharma..
Just an attempt to help, enable your patch, usually you can't see the key menu if your patch is not enabled...(at least for CW) hope this you
 

Silver Member
Username: Brucester

Post Number: 882
Registered: Jul-06
put in the new bin for the cw600s it is 157 you can get it at completefta dot com and to get to keys on cw i think the s is the same as the p hit page down on the remote
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us