Pansat 2700 video issue

 

Silver Member
Username: Impala1977

Post Number: 177
Registered: Apr-06
Dear FTAers, recently my stb has started displaying vertical and horizontal lines like a grid sometimes with green blobs making it impossible to watch tv. I switched the box off in the back and left it alone for a few hours. After turning it back on the picture was normal but after a few minutes the problem came back. I imagine there is something getting hot but I don't know where to begin. Has anyone had the same issue? Thanks in advance.
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1897
Registered: Sep-06
a few questions
well one


how are you connected to the tv from the receiver?
 

Silver Member
Username: Impala1977

Post Number: 178
Registered: Apr-06
red and white=audio
yellow =video
mmmhh? maybe I should try a coaxial hook up.
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1902
Registered: Sep-06
you should....also try and see if your RCA cord is bad..( change it with a new one)...same thing happened to me I was thinking man my receiver is going retarded but it was a bad cord!
 

Silver Member
Username: Impala1977

Post Number: 179
Registered: Apr-06
Tried it to no avail, althought the coax to the tv from the box is rg59 and the sat to the box is rg6. It came clear but after a few minutes the grid and spots are back.
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1905
Registered: Sep-06
welp time for a viewsat then or a fan inside that receiver
 

Silver Member
Username: Impala1977

Post Number: 180
Registered: Apr-06
No doubt, good troubleshooting though, thanks.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us