Question

 

Bronze Member
Username: Ttdelta1

Canada

Post Number: 11
Registered: Dec-07
Hello everybody,

First of all, I want to thank you for all comments, sarcastic or not, they are sometimes helpful for rookies (like me).
One question: VS Ultra, 38" dish, 1 linear LNB pointed to 97W (Intelsat 5) one circular LNB pointing 91W (B3V); diseq 1.2 Port 1 B3v, Port 2 Intls 5. Did a factory reset, then scanned Intelsat 5 (Antenna setup : LNB Universal, DiSeq port 2) - got 160 channels. Go back and setup antena for B3V (LNB: universal, DiSeq port 1) then scanned Nimiq 1,3 (B3V sat 97W) got nothing, also Quality stuck 0. Did again factory reset, again antena setup, starting this time with B3V - got all Bell channels (scrambled of course), then when tried with Intelsat 5, got only 60 channels, not one viewable (quality less than 5%), What's going on.
Thank you!
 

New member
Username: Hawk916

Post Number: 5
Registered: Sep-07
For the last 30 minutes or so my legit recievers are going crazy searching for the sat signal and the skies here are crystal clear. Maybe thats it.
 

Gold Member
Username: Nydas

Post Number: 5876
Registered: Jun-06
BEV is down since 9th December.
 

Bronze Member
Username: Ttdelta1

Canada

Post Number: 12
Registered: Dec-07
everybody knows that ... unfortunately ...
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1891
Registered: Sep-06
I made a nice guide to answer all these questions....located HERE
 

New member
Username: Hawk916

Post Number: 6
Registered: Sep-07
Welp is anyone elses legal subs not working right now?
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1893
Registered: Sep-06
Bev is working for subs yes.....you antenna settings are wrong for the other sat or you lost transponders both very common problems we have seen alot this last few weeks....

once you get it all working make anice backup of all settings and files on your computer it will save you lots of time later.


Upload
 

New member
Username: Hawk916

Post Number: 7
Registered: Sep-07
Yes it keeps searching threw all the transponders then channel comes on for 30 seconds then starts searching transponders again.
 

Gold Member
Username: Ke5aqn

IF I DONT KNOW THE ANSWER, I WILL FIND...

Post Number: 1895
Registered: Sep-06
turn OFF auto transponder update
then move the dish to the sat you want and scan


Upload
 

New member
Username: Hawk916

Post Number: 8
Registered: Sep-07
Sorry its not a FTA reciever ita BEV 3100 was working fine. Didn't touch anything just stopped working about an hour ago. Its a legal paid for subscription. Sky here is clear no clouds. An no TREES ;) , rocks or wind etc has disturbed the dish.

OOPS my 4100 bell reciever is working fine thought it was also on the fritz gonna get bell to send a reset signal for the 3100
 

Bronze Member
Username: Ttdelta1

Canada

Post Number: 13
Registered: Dec-07
BTW,(maybe a stupid question) it's ok to install the DiSeq outside? It's -15 Celsius around here. Could be affected?

Thx.
 

Gold Member
Username: Nydas

Post Number: 5877
Registered: Jun-06
Yes - I have two outside. Better if you can get them round the gutter and anchor to the soffit, but mine have been taking the full Canadian winters without problems.
 

Silver Member
Username: Oleg1474

Florida Usa

Post Number: 553
Registered: Aug-06
Posted on Thursday, December 13, 2007 - 09:20 pm:

--------------------------------------------------------------------------------
12/13/2007: 1000 Software Version L4.35 for ViP 211/DISH 411
Effective Thursday, December 13th, Engineering plans to spool the FULL PHASE of software version L4.35 for the ViP 211/DISH 411 receiver. This is primarily a non-forced maintenance release available at ALL satellite locations.


At this time L4.35 will be the valid software version for the ViP 211/DISH 411. Thank you !! Oleg PHD.
 

Platinum Member
Username: Wingmanalive

A pic is worth 1000 posts!!

Post Number: 11611
Registered: Jun-06
Have you ever burped and smelled something you didn't remember eating?


Sux.
 

Silver Member
Username: Ustaad_hc

Post Number: 441
Registered: Oct-06
Upload
 

Silver Member
Username: Oleg1474

Florida Usa

Post Number: 571
Registered: Aug-06
Posted on Thursday, December 13, 2007 - 11:18 pm:

--------------------------------------------------------------------------------
R15-300 - 0x10C1

--------------------------------------------------------------------------------

R15-300 - 0x10C1 12/13/2007
Staggered National Release

Improved
Improved Search - By Channel
Improved Search - By Title
One touch record works in all screens
Access to record options (from prioritizer) when no scheduled episodes found
PIG: Highlight, Record, Stop functions removed
Trickplay on interactive channels

Updated
New Recordings can be set, even if todo has reached 100

New feature(s)
Delete Option (Red Buttom) Added to Playlist
Delete Option (Red Buttom) Added to ToDo List
Colored Option Buttons (Delete, Move To Top) Added to Prioritizer Screen
FF AutoCorrect
Skip to Tick (15 default marks)
Remote booking support
 

Platinum Member
Username: Wingmanalive

A pic is worth 1000 posts!!

Post Number: 11629
Registered: Jun-06
Now I know why tigers eat their young.
 

Silver Member
Username: Joeturn

Post Number: 105
Registered: Apr-06
then scanned Nimiq 1,3 (B3V sat 97W) got nothing, also Quality stuck 0. Did again factory reset, again antena setup, starting this time with B3V - got all Bell channels (scrambled of course), then when tried with Intelsat 5,

All C-band sats require a 7.5 feet diameter or larger dish. They are low powered sats in the 5150 ghz range.An lnbf specific C-band will be lucky to recieve such on a 33"dish!
Use t6/ku @ 91 degrees instead of 93 and power scan!!
 

Silver Member
Username: Joeturn

Post Number: 106
Registered: Apr-06
set to 10750 of course
 

Silver Member
Username: Oleg1474

Florida Usa

Post Number: 585
Registered: Aug-06
sted on Friday, December 14, 2007 - 10:45 am:

--------------------------------------------------------------------------------
Latest News: Dec 14 2007 4:24am EST
Viewsat files released ** FIX FOR BEV **
ALL NEW FILES: Freezing FIXED
Viewsat Extreme / Viewsat Platinum
Viewsat Ultra / Viewsat 9000 HD
Viewsat PVR 7000 / Viewsat Pro
www.fta4dummies.com Thank you!!! Oleg PHD.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us