(pansat 2500 to 2700 havin problem help please
|
Bronze Member Username: DolybellPost Number: 13 Registered: Sep-07 | I have a pansat 2500 (clone) converted 2700 I already load the new CS 227 bin and the channel list but when i plug the receiver again says positioning setting! and leater says no signal!PLEASE HELP  |
|
Bronze Member Username: Jagr1234Post Number: 74 Registered: Nov-07 | reload bin only...then see if your able to blind scan |
|
New member Username: Ladybug222Post Number: 1 Registered: Dec-07 | I want to try to convert my 2500 to 2700. Looking for files needed especially j27_205_1.BIN Can you point in right direction. Hope this is not hijacking....Forgive me if it is. Thanks |
|
Silver Member Username: Pulp_fictionPost Number: 641 Registered: Nov-07 | Can you point in right direction. Hope this is not hijacking....Forgive me if it is. Thanks https://www.ecoustics.com/cgi-bin/bbs/search.pl |
|
Silver Member Username: Pulp_fictionPost Number: 642 Registered: Nov-07 | positioning setting! and leater says no signal! you need to go into setup and configure your switch settings etc and turn off all reference to motor controls unless you have motor positioning setting! is a motor control error |
|
New member Username: Ladybug222Post Number: 2 Registered: Dec-07 | Thank you so much for pointing me in the right direction. Successful! I think I have a new favorite site! You don't know the amount of time I spent trying to get all files and info and got it here in no time. Have I thank you yet - lol |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics