Hi all Ariza autoroll fix came out Ariza700,750,800,700s Hi guys here you go I hope you all enjoy a great weekend! Here you go have fun! And Happy testing. Posted here first only on www.FTATALK.Com now i can see PPV Thank MINGO><OGNIM
loader 2 is available at just about every forum except this one. Pick a forum listed below and go to the section for your receiver and you will find everthing you need.
Total FTA-Viewsat HOME SITE: [link removed] (C00LSAT and All receivers)
DSS Newbies: [link removed]
Ariza [link removed]
CaptiveWorks [link removed]
FTA [link removed](Pantecs,all clones and all receivers)
[link removed] http://ekb.dbstalk.com/dishlist.htm ( unofficial DN channel list )
here is a how to for the loader
LOAD VIEWSAT:
To load latest new program bin file
Connect a NULL MODEM cable (pins 2&3 cross) between the ViewSat and your PC. NO POWER to ViewSat yet.
Open "Loader2
Click "Open Files"
Browse to directory holding "Latest Program Bin.PGM", Click on it to "OPEN"
Click PC-->STB on your computer screen; then Power "ON" your ViewSat electric power (ON/OFF switch Platinum; plug in Black). You should see the File loading properly.
WARNING: DO NOT POWER VIEWSAT OFF UNTIL TOLD!
After file transfer is completed, the Front Panel will display: "inst" for 15 seconds while the software is being installed "DONE" for 10 seconds while the ViewSat does housekeeping chores next, the ViewSat automatically reboots.
The display will read "on" and when the reboot is complete, "0000?
You may NOW turn "OFF" the ViewSat and connect it to your TV and satellite dish cable
To load, sat file, channel list or Opkey. Follow the above procedure clicking on each file. The loader will put them in the proper place.