I use to have dish i was a subscriber,i set up viewsat everything worked good,i install the new file i change channle,i noticed i lost sig from 110, settings were the same i have a dish pro ,it now shows only 119 on port 1 ,even on port 2,but now i 118 will show up even if i change ports,i only changes the file nothing else please hlp
If everything worked before you updated then something changed. Just study all settings and you should find what changed. Based just on what you posted it looks like you have a problem with your switch.....what is your antenna and what switch are you using?
Depending on what reciever you have Set each lnb type as dishpro or ocs-dp 119 will be port or lnb 1. 110 will be port or lnb 2. lnb freq will be 11250 on each. Legacy switch off on each. some require 12/18v turned on others do it automatically.
