1. Either Enter 8282 on your remote, or you can ht the "Mute" button on your remote and then hit the "Exit" button. 2. Then Making sure that you have the very top box says 1 Nagravision for Dish Net, or 2 Nagravision for BEV . 3. To enter your keys, you can use the numbers on the number pad, and the info button to change letters. Hit the Info button until you get the letter you want, then hit the Right Arrow to change slots. 4. Or, you can hit the OK button and a new menu will pop up. Just use your arrows to select the numbers and letters you want and hit the OK button after each one. (Hit the exit button one time to get out of the little pop up screen.) 5. Now scroll down to the data in line 10. Enter the first half of KEY 86 (or Key 00) in this line. 6. The go to line 11 and enter the second half of Key 86 (or Key 00) in this line. 7. Then go to line 20 and enter the first half of Key 96 (or Key 01) in this line. 8. Next go to line 21 and enter the second half of Key 96 (or Key 01) in this line. 9. Now hit the Exit button. 10. When the next screen pops up asking if you want to save changes, Use your arrows and select "Yes" and hit the "OK" button. 11. Now, change your channel, and watch TV.
THANKS again FTA TESTER but i'm not looking to get any channels but instead unscrambled channels (doest that make sense?) because a few weeks ago my premiere channels were working fine but since my brother deleted them by accident (factory button) i have managed to recover them but i cannot watch them now because they are scrambled so i though that by entering new keys i could maybe unscramble them
