|
Gold Member Username: NydasPost Number: 5592 Registered: Jun-06 | A. THESE INSTRUCTIONS APPLY TO: Pasnsat 2500A and named and nameless clones of 2500A Forect LifetimeUltra If using an original pansat 2500a, install 293T or 294T Bin first Any of above whether converted or not converted. B. Sites for download of files. [link removed] [link removed] C. Preparation:. Make a directory or subdirectory called 'jvvh' Download files into this directory: BL Updater 1.4, 225,280 bytes, b75_m_1.bin, 64KB (may be needed) jv_205.1.bin, 640KB jvvh_208.1.bin, 458,752 bytes jvvh_213.bin (optional) Extract CS_225T_Lightning_100t_Series_serial.bin'" 448K bytes from the zipped file CS_225T_Lightning_100t_Series_serial.zip Note that you do not need the full jtag file. (You may use the jvvh_Leafs+225.bin extracted from Jvvh_leafs(BG)_225.zip) All these files should be in the jvvh directory, Straight RS232 DB9 F/F cable. Connect computer to receiver via serial port using 9 pin F/F DB9 cable above. Receiver should be switched off. D. Action: If going from any jvvh Bin 221 onwardss, skip the installation of 208_1. If having problems with too many resets or other problems, do the 208_1 part. </b> Go into Windows explorer and find the jvvh directory. Double click on BL Updater 1.4 If going from flu or Genuine Pansat Select BIN and select file jvvh_208.1.bin (do not select BOOT) If going from Pantec and other clones, Select BIN and select file jvvh_208.1.bin (do not select BOOT) Left hand ready on switch of receiver and right hand ready on Mouse pointing to 'Write BIN' Switch on and IMMEDIATELY CLICK 'WRITE BIN' Wait, Wait, It will start loading the BIN, and go to100% The it will say, 'BURN' on your screen. The receiver will then show b75 flashing. WAIT. WAIT When you see the screen of receiver settle down at '5' , it is still NOT FINISHED. You will see ON come on the receiver. Turn receiver off. If b75 BIN does not show up, then go through the process of installing B75 boot using BOOT in the menu. This part is optional. Repeat above selecting and using BIN 213. This time click the mouse for write AFTER seeing 'b' come on'. This is optional but recommended. Repeat above selecting and using CS_225T_lightnimg_110t_serial.bin. This time click the mouse for write AFTER seeing 'b' come on' With receiver showing ON, turn off the receiver and exit from BL updater 1.4 Disconnect receiver from computer. E. Installation: With receiver switch in off position, connect the Sat antenna, and the cables to TV. Turn on TV Turn on receiver. You will see b75 go across and freeze on '5'. WAIT After a little while the TV will come on asking you to confirm Language English. Press OK. First do Menu/System Reset. It will ask for PIN '" use 1668 if you have forgotten your PIN, usually a 0000. Next do default settings Next do User setup. Set time to manual and enter the correct time, date, and time zone. Make sure summer time is off. Next do Menu/Dish Setup/Antenna setup Select your known dishes and use the known DisEqC port connections. You can connect to ports without knowing which is which using trial and error and the signal strength. Now do Blind scan (power scan) for each of the selected sats. You must see Vertical TPs. F. Watching TV: By the time you finish the blind scan, the new keys will have loaded and you are ready to watch TV. You MUST switch off at the back once and switch on. You can se up the channels alphabetically or in other ways using Channel Edit and Sort. You can and should set up P-lock on some P0RNO channels. You can rename the 5 Favorites using right arrow key. If a channel does not appear, you can do a separate TP scan. Also look for it in the list, e.g. channels 614 '" SET may appear in the list as TV 614, and you can rename. HAPPY VIEWING If resets occur, try turning autoroll off and auto TP off. |
|
New member Username: LanxerPost Number: 9 Registered: Dec-06 | Is there any other sites to get it from or is there anyway you can upload the neccesary files to a different website like megaupload.com Everytime I go to any of the listed website, all I get is server busy messages. |
|
Gold Member Username: NydasPost Number: 5679 Registered: Jun-06 | Everything you need for 2500/Flu to 2700 conversion in one package. Instructions included. http://public.box.net/2500_full_kit |
|
New member Username: KhovaPost Number: 4 Registered: Apr-07 | hi i tried the conversion from my flu clone and i had to reset it because the numbers kept flashing i need to know if i need to use the jvvh_208_2500to2700.bin or jvvh_208.1.bin, cause i tried the second one and it messes up |
|
New member Username: KhovaPost Number: 5 Registered: Apr-07 | if it matters i have the 294T Bin |
|
New member Username: KhovaPost Number: 6 Registered: Apr-07 | help help |
|
Gold Member Username: NydasPost Number: 5715 Registered: Jun-06 | Read the instructions in this package and follow them. http://public.box.net/2500_full_kit |
|
Bronze Member Username: Ben333Post Number: 13 Registered: Mar-07 | hi Nalin, please can you help me i follow your instruction for conversion my pansat 2500A,but all thing i had is (- - -) flashing on the screen of my receiver,..do you think my receiver is dead? and what can i do? |
|
Bronze Member Username: Me_mePost Number: 39 Registered: Nov-07 | THIS IS FOR PEOPLE THAT BEEN CONVERT TO 2700 NOTE: ALL CHANNELS COME IN PPV & ALL A/R D/N & bev Thanks go to Chancysand for CS_226T_Lightning_100t_Series_serial Load Chancysand CS_226T_Lightning_100t_Series_serial over any of the jvvh bins or CS_224Tor CS_225T serial bin, I used the 2500 to 2700serial Loader, with box off bin in loader, then turn box on and when it starts flashing hit write and ALL WAYS LET IT BOOT UP ALL THE WAY but use what ever loader works for you NOTE: AUTOROLL OFF AND STILL A/R KEYS IN ALSO: SAVE YOUR CHANNLS BEFORE YOU LOAD ANY NEW BIN WITH CHANNEL MASTER & THEN LOAD TO STB AFTER YOU AFTER YOU LOADED NEW BIN< USE PANSAT_2700 AS YOUR STB WITH CM I tested the new CS_226T_Light bin with chancysand and he came through again Thanks Chancysand NOTE: after loading 226T serial bin and if you get scramble hit 8282 on remote and do a set key default A/R on bev & D/N |
|
New member Username: FoxcroftPost Number: 5 Registered: Oct-07 | Is anybody knows the answer? I have converted FLU, every time after update to the new bin all channels getting erased, and I have to search Dish all over again. Tried to install CM before and after the new bin installation - no diference. Thanks. |
|
Gold Member Username: NydasPost Number: 5726 Registered: Jun-06 | You can use software to save your channels and then upload them after installing the new BIN. |
|
Gold Member Username: NydasPost Number: 5727 Registered: Jun-06 | This is the complete package as of now. Read the instructions in this package and follow them. http://public.box.net/2500_full_kit |
|
Bronze Member Username: Ben333Post Number: 14 Registered: Mar-07 | hi Nalin Nyda, yesterday I use your (public box,full kit)to convert my pansat 2500a in 2700,it works,but for nimiq1,on nagra2 I got just one key (00),and if i want to change on key(01) i lost the (00)...can you tell me please what is wrong ,and how I can fix it? thanks. |
|
Bronze Member Username: Abdou91514 Post Number: 98 Registered: Jun-06 | just go menu --- parental control----secod pin -- 0000-- scroll down ---default key press ok but new key you are back to nrmal with key 00 and key o1 Until ow nothing is working wait for a new fix |
|
Gold Member Username: NydasPost Number: 5769 Registered: Jun-06 | After loading the latest BIN you have to do a default setting, then TV setting and Antenna setting and Scan. YOU DO NOT enter key manually. The 0101 (DN) and 0901 (BEV) keys will roll in automatically. The 0106 (DN) and 0907 (BEV keys are the problem since yesterday afternoon 4.00 pm. You will have to wait for another BIN CS_227T_Lightning. It is not available yet. |