How to?


Bronze Member
Username: Raceman24

Post Number: 33
Registered: Dec-06
i have two dishes one for dish and one for bev .how do i get both without unhooking one and hooking up the other ..i have try the switch that i got with my sonicview 1000 but i don't want to work right ..i have dish pro on both satellites dishes

Silver Member
Username: Ke5aqn


Post Number: 902
Registered: Sep-06
It should work like this...

One line from receiver to to first LNB on DN (110, 119?) antenna...... one from switch to LNB on antenna pointed at (81, 91 ?)BEV.....trouble I can think of here is the tone you have to send to the lnb on a dish500 to get it "look" at the sat you want will get confused by the tone you will have to send to the switch telling it what antenna to look at I don't thionk you can send them both...........

I spent 2 day's at a customers house trying to get that SAME set up to work.....we never could so he got a 31" dish and a motor much easer to set up and you get SO MUCH MORE than just 4 sat's...

Tell us what you have tried and we can go from their

Gold Member
Username: Nydas

Post Number: 4963
Registered: Jun-06
If you have a Dish pro, use DP34 switch.
If you have a Dish pro plus, use DPP 44.

If using DP34, add an old useless receiver (switch on at all times at Port 1, or have two receivers always on or power toeh port1 separately.

Gold Member
Username: Cartier1

Post Number: 1382
Registered: Feb-07
roy we need some information .
the lnb on your dish: is this dishpro sigle lnb or dishpro legacy twin.???
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us