I have a question...

 

Silver Member
Username: Cricket674

Post Number: 137
Registered: Feb-07
I have a converted pansat 2700a ( 2500a to 2700a) I put the chancy sand 221tv2 and it's working fine. But i say posts here saying the new one is good. My question is that Should I keep the file I have or put the new one. I mean is there a risk with the file I have now.
 

Gold Member
Username: Nydas

Post Number: 4934
Registered: Jun-06
CS_222T_lightning has a few glitches even with autoroll off. The CS_221Tv2_lightning was better - no glitches with autoroll off. If you are looking at DN only, no need to change.
 

Silver Member
Username: Viruscauser

Leesburg, Georgia

Post Number: 409
Registered: Mar-07
Thanks Nalin. Now I don't have as my question.
 

Silver Member
Username: Cricket674

Post Number: 138
Registered: Feb-07
Thank you a lot Nalin your a big help
 

New member
Username: Famf555

Post Number: 1
Registered: Nov-07
The old saying goes, if it ain't broke, don't fix it!
 

New member
Username: Bbplayer

Post Number: 1
Registered: Nov-07
I have a 2700a and would like buy something new.
what is the best for 250 or less.
 

Gold Member
Username: Dude123

Post Number: 1340
Registered: Jul-06
Viewsat ultra
C00lsat 4000
Conaxsat mini
 

New member
Username: Bbplayer

Post Number: 2
Registered: Nov-07
thank you
Viewsat # 1
Colsat 4000 #2
Dont know Conaxsat who has info?
 

Gold Member
Username: Rtap

FL

Post Number: 1047
Registered: Jan-07
bb think about the sonicview.grert receiver and support
 

Gold Member
Username: Rtap

FL

Post Number: 1048
Registered: Jan-07
heres the info on conaxsat mini.

Features:


* Upgrade Software & Update Channel Database through USB Port and RS232
* MPEG-II Digital & Fully DVB Compliant.
* Smart Card Reader(Optional)
* C/KU band control for each antenna
* LNB Tone Switch 22KHz mode on/off'
* Multi-LNB controlled by DiSeqC =>DiSEqC 1.0, 1.2 and USALS'
* Total 5,000 Channels Programmable
* Blind Scan
* Picture In Graphic (PIG)
* Electronic Program Guide (EPG) for On Screen Channel Information
* Multi-language supported for Menu and OSD
* Zoom Function by 2x..4x
* Parental Lock
* Closed Caption Support
* Universal Remote Control
* Dolby Digital Bitstream Out through S/PDIF
* CVBS Video & Audio Output via RCA
* Component Y/Pb/Pr Output via RCA
* S-Video Output
* MP3/JPEG File Play via USB Port
* 7-Segment(4-digit) Type of Front Panel Display


Conditional Access Interface

* SMART CARD(Optional) 1 Slot
* ISO 7816, GSM11.11 and EMV (payment systems) compatibility


Tuner & Channel

* Type 1 × F Type, IEC169-24, Female
* Frequency Rage 950MHz to 2150MHz
* RF Impedance 75 Ohm unbanlanced
* Signal Level -65 to -25 dBm
* LNB Power 13.5/18.5Vdc +/- 5%, 0.5Amax, Overload Protected
* 22KHz Tone Frequency : 22KHz +/- 2KHz, 0.6Vpp +/- 0.2V
* DiSEqC Control Version1.0, 1.2, Tone burst A/B
* Demodulation QPSK
* Input Symbol Rate 2~45 Ms/s, SCPC/MCPC
* FEC Decoder Convolution Code Rate 1/2, 2/3, 3/4, 5/6 and 7/8 With Constraint Length K = 7


System & Memory

* Main Processor 32-bit ARM946 RISC Processor
* Flash Memory 4 Mbytes
* System Memory 32 Mbytes
* Channel Capacity Digital Channel: 5,000
* Front 7-segment Display (4 digit)


MPEG Transport Stream & A/V Decoding

* Transport Stream MPEG-2 ISO/IEC 13818 Transport Stream Specification
* Profile Level MPEG-2 MP@ML
* Input Rate Max. 90Mbit/s
* Aspect Ratio 4:3, 16:9, Letter Box
* Frame Rate 25Hz for PAL, 30Hz for NTSC
* Video Resolution 720x576(PAL), 720x480(NTSC)
* Teletext Through VBI
* Audio Decoding MPEG/MusiCam Layer I & II
* Audio Mode Single Channel/Dual Channel Joint Stereo/Stereo
* Frequency Response 20~20kHz, <+/-2dB
* 60Hz ~ 18kHz <+/- 0.5dB
* Sampling Rate 32, 44.1, 48KHz


A/V & Date In/Out

* RCA Output CVBS, L, R Output(Yellow, White, Red Jack) with Volume Control
* Component Video(YPbPr) Out
* S-VHS Output 4 Pin Mini
* SPDIF Dolby Digital Bitstream Out(Coaxal, Optical)
* Data Interface - RS-232, Bit Rate: 115,200baud
* Connector: 9-pin D-sub Male type
* USB : Type A Connector


RF Modulator

* RF-Connector 75 ohm F-Type
* Frequency Range VHF CH3, CH4
* TV Standard NTSC
* Audio Output Mono with Volume Control


Power Supply

* Input Voltage AC 90V ~ 250V, 50Hz ~ 60Hz
* Power Consumption Max 40W
* Standby Power Consumption <= 10W
* Protection Separate Internal Fuse The input shall the lighting protection


Physical Specification

* Size(WxHxD) 290mm x 50mm x220mm
* Weight 2.0 KG


Environmental Condition

* Operating Temperature 0 °C ~ 40 °C
* Storage Temperature -10 °C ~ 50 °C
* Operating Humidity Range 10~85% RH, Non-condensing
* Storage Humidity Range 5~90% RH, Non-condensing
 

Gold Member
Username: Dude123

Post Number: 1342
Registered: Jul-06
sonic view was the last one to comeup with the fix last time....however they are not bad receivers.
 

New member
Username: Bbplayer

Post Number: 3
Registered: Nov-07
who comes up with the fix 1st
 

New member
Username: Bbplayer

Post Number: 4
Registered: Nov-07
thank you for info on conaxsat
 

Gold Member
Username: Dude123

Post Number: 1343
Registered: Jul-06
last time it was conaxsat but see, that receiver is pretty new so I would still wait until it gets a little popular. Best suggestion is to go and get a viewsat ultra it has a good support and good features like the usb feature where you don't have to unhook everything from your tv and then hook it up to your computer to load the bin file.....NO, you just have to take the usb and transfer the file through that so thats pretty convenient too...
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us