61.5 AutoRolling all the Time

 

Bronze Member
Username: Addtemp

Post Number: 29
Registered: Oct-07
Hi I am getting AutoRoll on 61.5 Indian Channels and in Nimiq 2 also ATN is not working. On Nimiq 1,3 I have problem with Discovery and few other channels. Can someone Help?

Every thing was working till yesterday and61.5 till 10:00pm 11/13/07
 

Bronze Member
Username: Addtemp

Post Number: 31
Registered: Oct-07
Sorry for double Post ...It seemed not to work on first try ....
 

Bronze Member
Username: Addtemp

Post Number: 32
Registered: Oct-07
Any One can Help ?????
 

Platinum Member
Username: Lklives

Post Number: 13594
Registered: Jan-06
Not sure..

If Missing an entire satellite 61.5...reboot receiver with rear switch off for few minutes, then ON..this fixes various problems and should always be done first with ANY type problems..

check cables/connection...recheck antenna settings

BTW...there was a key change last night and another one recently this morning, be patient when keys change (may take 20 minutes sometimes or longer), and have your Autoroll ON...

For missing SOME channels only on Bev, just scan the TP's that are missing the channels..
 

Bronze Member
Username: Addtemp

Post Number: 33
Registered: Oct-07
Thanks LK ...
If there is a Changein Key Do I have to manually Enter the KEY ..

I have AutoRoll on and it does display AutoRoll on all 61.5 Channels ...
It worked fine for a day or 2 after installing the new bin with 106 Key Change.

I will try a reboot by switching it off from the back ...
 

Silver Member
Username: Satgrl

Post Number: 536
Registered: Oct-07
aamir which receiver u have?
 

Bronze Member
Username: Addtemp

Post Number: 34
Registered: Oct-07
I have a Viewsat Pro ... I got the latest bin from total .... on 11th
 

Silver Member
Username: Dghumman

Ontario Canada

Post Number: 147
Registered: Feb-06
yes i know theres problem with 61.5 it keeps auto rolling but after 5 to 10 minutes after u switch to 110 or 119 but not ppv u will be able to watch 61.5, i tried it an its working because it happened last night and it happened again today afternoon
 

Bronze Member
Username: Kacha

Post Number: 17
Registered: Jan-07
i can't do any vertial scan on my pansat 2700flu...anyone can help??
 

Gold Member
Username: Nydas

Post Number: 4871
Registered: Jun-06
The original Chancy BIN 221 had this problem.
Use CS_221Tv2_lightening BIN
 

Bronze Member
Username: Kacha

Post Number: 18
Registered: Jan-07
which satellite should scan for all us locals and ppv channels...all im getting is international channels...someone please help!!!
 

Gold Member
Username: Cartier1

Post Number: 1367
Registered: Feb-07
aamir satgirl only knows about sonicview . she will ask you to buy sonicview so that she can help you.
 

Bronze Member
Username: Kacha

Post Number: 19
Registered: Jan-07
nalin where do i find that bin?
 

Bronze Member
Username: Addtemp

Post Number: 35
Registered: Oct-07
Thank you I got all my channels back after a day. When I went back home all the channels were working. I didn't try to reboot the receiver.
 

Gold Member
Username: Nydas

Post Number: 4878
Registered: Jun-06
kacha : go to the fortec ultra files or Pansat 2500 files at

[link removed] or
[link removed] or
http://www.dssrookie.com

The zipped file is
CS_221Tv2 Serial.zip

You will have to unzip and extract the files.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us