Hey I was wondering if someone could guide me. I have Pansat 2700A Receiver with X-87BL_061124_288_api loaded onto it. I was trying to get this receiver to work knowing that this is a very old file. I understand that I need to download the Tivo 221 bin, using the 27.02 Loader, and the B75 Flash....is this correct? Can I install the B75 flash straight away or do I first have to install the B70 and then the B75 to get this thing to work? Also I was reading some info up and read sometimes it says 2700A on the receiver and it is actually a clone of 2700A so how do I know what my receiver is? Can someone please guide me on how to go about doing this and what files I need to put onto the receiver?
I am trying to download the B75 Boot file onto the receiver however whenever I turn on the receiver and click on download nothing happens. Can someone tell me what I'm doing wrong?
2. Open new [ Blacklist STB Updater Version 27.02 X-87BL.exe]. <--(Included in a Zip File)
3. Click Select File and open Boot_2700A (b75) _ (07)0310 new boot file. <--(Included in a Zip File)
4. Turn the receiver power ON and click Write File and wait until Download Completed OK will appear.
5. Front LED will display moving b-7-5 left to right if upgraded succeeded.
6. Open new api bin file matching with b75 boot version, <--(Included in a Zip File) (Any api version dated on or after Mar 10, 2007 and click Write File. Wait until Download Completed OK appears. Front LED will display b-7-5 and channel number will appear shortly. If your receiver is in Factory Default Condition, front LED will appear ON shortly. 8. 2700A/E (IR) all models can be applied.
2. b75 boot upgrade needed only one time for each Receiver.
3. =WARNING ================================================== ================= Do not interrupt the main power until download completed OK appears on the PC screen. It may damage the receiver seriously. If download fail appears, check the api bin file date if it is old version before Mar 10, 2007. It should be Mar 10, 2007 or after dated one.
According to LK, she recommends reading at the following sites and gathering information.
Data Viewing Sequences [link removed] (Conaxsat and All receivers) Future FTA - Blacklist's Site: [link removed] (C00LSAT and All receivers) DSS Newbies: [link removed] (Pantecs,all clones and all receivers)
File Share Site - No Registration Required: -------------------------------------------------- Good for gettting Original factory firmware: [link removed]
Best site for DISHNET info, channels, transponders and changes etc.. [link removed] [link removed] [link removed]
or get Keymaster 4.0 here free and NO registration is required... [link removed]
I've tried countless times to download the boot file by clicking on download as soon as I see the first dash however nothing happens. I'm using the X-87BL Loader v27.02. Can someone help me out with this?
hello everyone i hope someone can help me i have a pansat 2700a with the latest bin 221 but my receiver does not catch a signal on 110 and 119 i know my dish,lnb and switch are fine because i hooked another receiver to it and it works fine does anyone know why my receiver does not want to catch a signal at all ? and how can i fix it