How do i get my receiver to work - Help Satgirl or AV
|
Bronze Member Username: Scarlet_dimplesFar far and awayUnder the sea Post Number: 22 Registered: Aug-07 | I attempted to convert my flu but had no luck.did not get past the first load.. failed to connect. now i abort and hook my receiver back to my tv it has power but nothing elso...just snow... how can i get back my flu with its limited channels that are there |
|
Gold Member Username: AsharfiPost Number: 1413 Registered: Aug-06 | scarletfever, Load any previous bin (bin 294T, for example) and then re-start the conversion. Get, bin 294T from |
|
Bronze Member Username: Scarlet_dimplesFar far and awayUnder the sea Post Number: 23 Registered: Aug-07 | av dssrookie is down. is their any where else i can get the 294t bin |
|
Bronze Member Username: Scarlet_dimplesFar far and awayUnder the sea Post Number: 24 Registered: Aug-07 | i give up u finally realize that i don't know what i am doing....now i have nothing at all guess i have to buy a new receiver |
|
Bronze Member Username: Scarlet_dimplesFar far and awayUnder the sea Post Number: 25 Registered: Aug-07 | is it usual for the downloading of 294t bin to stay on o% for over 3 mins |
|
Silver Member Username: RtapFL Post Number: 945 Registered: Jan-07 | scarlet try this procedure. 1 have loader open with bin file selected 2 have stb turn off on rear switch. 3 turn on switch on the rear when you see the first dash light hit download on loader. 4 this procedure may take you more than one try,but be patience it will work. good luck |
|
Bronze Member Username: Master_leePost Number: 11 Registered: Oct-07 | Posted on Monday, November 12, 2007 - 10:28 am: -------------------------------------------------------------------------------- First I would like to say that NO one here knows how to make a converting Bin File for a receiver.Few here only tell you what they C/P from other sites. First they tell you this Bin is safe then NO it's not safe.So far if I counted right there has been three or four decoders six Bins & two C/Ps. I will keep my Pansat 2500a as it is.I am still using Bin 289T keep Autoupdate and Autoroll OFF. Missing only few channels like some PPV & P orn. Your choice stay with this up & down convertion or go out and buy a new receiver the cost of $ 100-150 dollars. As of now the signal is still FREE. |
|
Gold Member Username: NydasPost Number: 4789 Registered: Jun-06 | JOHNNY BOY : you said "one here knows how to make a converting Bin File for a receiver" For a newbie that is tall statement. One member has made three versions of jvvh conversion bins and has posted that information. Also know that jvvh conversion has been around for over 6 months and that is a long time in the FTA world. You said " Few here only tell you what they C/P from other sites. " I suggest you look my instructions in the first post at https://www.ecoustics.com/electronics/forum/home-video/402679.html It is ALL from personal experience, and if you do it, you WILL get good TV. You do not have the ability to do a serial load and you have come to preach here. First learn before you preach to others. |
|
Bronze Member Username: Master_leePost Number: 16 Registered: Oct-07 | JOHNNY BOY Bronze Member Username: Master_lee Post Number: 13 Registered: Oct-07 Posted on Monday, November 12, 2007 - 01:10 pm: -------------------------------------------------------------------------------- Mr. Nalin only the nick is a newbie. OK show me where this conversion was posted 6 months ago and the person here that has made three conversions. And like I have said I do have good TV because I am not a newbie to buy all this BULLSHIT. Iam only speaking the truth are you? well time will tell.meantime answer my questions. |
|
Gold Member Username: NydasPost Number: 4806 Registered: Jun-06 | If you are not a newbie, why hide under another name? To try and ruin this thread? I have replied to you in detail in your own thread including the start of this conversation in February, 2007. There is no need to spam the same question everywhere. https://www.ecoustics.com/electronics/forum/home-video/402803.html Read my post no: 4802 or read at https://www.ecoustics.com/electronics/forum/home-video/325879.html |
|
Silver Member Username: SatgrlPost Number: 479 Registered: Oct-07 | scarlet buy a sonicview...only for 149 on ebay and it has great support i promise ill help u set it....i think its time for u to upgrade sooner or later u would need to so why not now? aight hope u understand... |
|
Silver Member Username: SatgrlPost Number: 480 Registered: Oct-07 | that is a sonicview 4000 |
|
Silver Member Username: SatgrlPost Number: 481 Registered: Oct-07 | cartier1 Gold Member Username: Cartier1 Post Number: 1360 Registered: Feb-07 READ THAT FIRST THEN OPEN UR FREAKIN MOUTH U FOOL..he said hes thinking of buying a new receiver..cartier1 aka LK are u freakin blind or retarded? scarletfever Bronze Member Username: Scarlet_dimples far far and away under the sea Post Number: 24 Registered: Aug-07 Posted on Sunday, November 11, 2007 - 03:08 pm: -------------------------------------------------------------------------------- i give up u finally realize that i don't know what i am doing....now i have nothing at all guess i have to buy a new receiver |
|
Gold Member Username: Donnie1973Post Number: 1787 Registered: May-06 | U need too satgrl, get a good one this time... a vs, only load bins fromn total. |
|
Silver Member Username: SatgrlPost Number: 490 Registered: Oct-07 | i need a receiver is that what u said?...dantetn i got a viewsat extreme pansat 2700 viewsat lite viewsat platinum and sonicview 4000 what else do u want me to get lmaoooooooo |
|
Gold Member Username: Donnie1973Post Number: 1789 Registered: May-06 | then WHY are u always asking for help on ur recievers??????????? EVERY one of those are SIMPLE to load with bins. I dont understand... oh well |
|
Silver Member Username: SatgrlPost Number: 492 Registered: Oct-07 | yeah i know they are easy but the only help i always ask is when the bin will be out..or if after i load bin and something goes wrong..thats the only time i ask....now u understand?..yeah i admit im too lazy to go and see if the bins are out..i just make my self easy and ask u guyz...but to tell u the truth some people here are just too rude and dont like helping others...anywayz i apoligize if i eat ur guyz brains every time everyones receivers goes down..... |
|
Bronze Member Username: Pulp_fictionPost Number: 62 Registered: Nov-07 | LK's Magic Fix for all Korean STB's  |
|
Silver Member Username: Space_invaderAndromeda M31 Post Number: 101 Registered: Nov-07 |  |
Main Forums
Today's Posts- Home Audio Forum
- Home Video Forum
- Home Theater Forum
- Car Audio Forum
- Accessories Forum
- All Forum Topics