Connecting 6 Sats, help wanted.

 

Bronze Member
Username: Cybermaster

Post Number: 64
Registered: Jan-07
Hello Fellaz,
I want to connect 110, 119, 148, 82, 91, and globecast. I want to use 8x1 diseqc by digiwave. I've got sonicview sv-4000. But, under diseqc setting, I get only lnb1 to lnb4. In other words, I could only specify up to 4 sats. How can I specify sat 5 and 6. I don't want to use an sw21. If messes up the quality I heard. Can anyone help me out. Thanks in advance.
 

Gold Member
Username: Crazy_greek

Post Number: 1210
Registered: Jul-06

All you need is one (1) Invacom QPH-031 LNB
and a 90cm Motorized Dish to catch all
the Birds in the Arch.
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1577
Registered: Oct-06
For your 8x1 Switch
Sats 1 to 4 select 22KHz ON
Sats 5 to 6 select 22KHz OFF

It does have an internal 22KHz tone switching
If this doesn't work try:
Sats 1 to 4 select 22KHz OFF
Sats 5 to 6 select 22KHz ON


Your 8x1 Switch
Should be like 2 DISEQ and 1-22KHZ SW
Upload

https://www.ecoustics.com/cgi-bin/bbs/show.pl?tpc=2&post=1271942#POST1271942
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1578
Registered: Oct-06
This is an easier setup for 5 Sats:
22KHZ OFF to first 4 and 22KHZ ON to #5
Upload
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1579
Registered: Oct-06
Note:
SW21 and SW22 are totally different

For more switches
Visit King's Corner
Click here
https://www.ecoustics.com/cgi-bin/bbs/show.pl?tpc=2&post=967635#POST967635
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1586
Registered: Oct-06
Tony
6 satellites means that yo are a true hobbyist
It is definitely not a plug and play
A true hobbyist required to be a great satellite scanner or great hardware hands on
3 receivers means yo want to enjoy great service
Not the typical 1-800-SERVICE
Yo'll have obstacles and it is matter of how to resolve them

Well 6 satellites is like going from a Zero to 60 Miles per hour
How I do things maybe different from everyone else

Here are your choices:
- Motor scanner (requires patience and great scanning skills)
- Buy a generic multiple satellite switch like Zinwell 6x8
(will run across few obstacles)
- Cascade 4 SW34 and 4 DISEqC switch (require excellent wiring skills)


6 satellites require minimum of 3 or 4 dishes
with total of 6 LNBs
Or:
Wave Frontier Toroidal T90 or T55 Dish
Upload
Click here for more about Toroidal
https://www.ecoustics.com/cgi-bin/bbs/show.pl?tpc=2&post=998503#POST998503

3 receivers requires multi-polarity switch
Like Zinwell 6x8
Upload
Or Cascade your own like this diagram
Upload
 

Silver Member
Username: Impala1977

Post Number: 168
Registered: Apr-06
I'll be saving this thread. Great info. Thanks King.
 

Bronze Member
Username: Sliderip

Post Number: 16
Registered: Jun-06
Hail the King.

I already have one each of DP 34 and DP 44 plus (with power inserter) and would like to use em somewhere?
 

New member
Username: Offshorejoe

Post Number: 5
Registered: Jul-06
I SEEN UP 6 BIRDS ON ONE DISEQC SWITCH USING 2 DISH 500 LEGACY HEADS FOR THE 119 AND 110 LEAVE YOUR LNB TYPE ON SINGLE AND YOUR DISEQC SETTING BOTH ON PORT 1 THEN YOUR LEGACY SWITCH FOR 119 IS S44LNB1 THEN FOR 110 S44LNB2 DO THE SAME FOR THE OTHER DISH 500 FOR YOUR 91 82 USING BOTH ON DISEQC PORT 2 THEN YOU HAVE DISEQC 3 AND 4 TO GET OTHER BIRDS
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1588
Registered: Oct-06
Connecting 6 satellites to one DISEqC switch can be easily done.
Yo may not run across polarity switching issues if yo use one receiver.
6 Satellites to 2 receiver will require 4 units of DISEqC switches and each satellite LNB must have 2 coaxial outlets.

Remember
You are limited to 4 DISEqC ports and 0/22KHZ at your antenna setup.

I found this place for various switches
Buy at your own risk

http://store.high-techoffice.com/samu.html?OVRAW=satellite%20installation%2C%20n j&OVKEY=satellite%20installation&OVMTC=advanced&OVADID=4631060521&OVKWID=4726514 5521
 

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1589
Registered: Oct-06
Connecting 6 satellites to one DISEqC switch can be easily done.
Yo may not run across polarity switching issues if yo use one receiver.
6 Satellites to 2 receiver will require 4 units of DISEqC switches and each satellite LNB must have 2 coaxial outlets.

Remember
You are limited to 4 DISEqC ports and 0/22KHZ at your antenna setup.

I found this place for various switches
Buy at your own risk

http://store.high-techoffice.com/samu.html?OVRAW=satellite%20installation%2C%20n j&OVKEY=satellite%20installation&OVMTC=advanced&OVADID=4631060521&OVKWID=4726514 5521
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us