Need Help on How to upgrade using USB to RS232 cable with FTLink

 

Silver Member
Username: Hshakarchi

Post Number: 121
Registered: May-06
I have digiwave 7000 with serial port
my new PC has only USB ports. I can not use Nul Cable, so I baught a USB TO RS232 cable.
I installed the drive, when I open FTLink I get no communication.
Does anyone have an idea on how to download the bin to my digiwave, do I need a different "Loader" other than FTLink
Please Help!!!
 

Silver Member
Username: Pffft

Ya Right

Post Number: 259
Registered: Jan-07
soon as you install a USB - RS232 cable it reassigns a port for it. chances are you dont know what the port is that it gave it. and the loader needs to be switched to that Port.
it will tell you what port is was assigned to in systems
 

Silver Member
Username: Hshakarchi

Post Number: 122
Registered: May-06
True, it assigned a new port "COM6", so I renamed it to COM1 to be rcognized by loader, it worked.
Thanks again MrPig.
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us