Viewsat ultra question


New member
Username: Noahjosh

Post Number: 1
Registered: Sep-07
hello first time here and quite new to this..

Just bought an ultra..I have a dish capturing both dish net and do i program this ultra to read all both sats?
do i just upload the both bins for both sats..then switch from sat to sat when needed?
any help is much appreciated

Platinum Member
Username: Lklives

Post Number: 12386
Registered: Jan-06
Its 1 bin that has BOTH Bev and DN nagravion 2 upload 1 bin, and then do the other necessary things to the receiver..

Gold Member
Username: Hawaiian_time

Kanaka freak...

Post Number: 1512
Registered: Apr-06
It would be easier for you to go to total-fta.c0m. They are the viewsat official site and have all the information that you might need. You just need to register.

Gold Member
Username: Tapeman

New York City in-HD, NY

Post Number: 1516
Registered: Oct-06
- 1 Bin will work for both 070911U
- Yo have to set each LNB in antenna setup
- 1 LNB for each satellite for example (82/91 and 110/119) yo'll need 4 LNBs (2 dishes and 1 DISEqC) which usually comes with unit
- goto
- Find exact pointing angle and elevation
- Azmith means locate true north and start counting clockwise
- Turn your beep option on your Ultra to avoid using Sat finder or simply use both
- Always look at top right corner to read Satellite orbit location in your antenna setup

- Make sure your Receiver unit is always off when wiring coaxial cables and switches
- Assign each LNB to 1 unique DISEqC port
- Scan one satellite at a time
- Ask questions yo'll learn more
- Read often
- Check King's corner for proper wirring

New member
Username: Noahjosh

Post Number: 2
Registered: Sep-07
you guys are great

Silver Member
Username: Donnie1973

Post Number: 994
Registered: May-06
good post King
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us