Viewsat Ultra Shows Green Bars "- - - - "


Bronze Member
Username: Asplover

Post Number: 54
Registered: Jun-06

I am new to Ultra. I kept on getting Autoroll processing since many weeks, so i loaded the new bin file 070911 and created the new opkey using VS Key 2.5 and loaded it the same way as i did the pgm file.

After loading the hex file it never came back to 0000 and than i turned off the receiver and hooked it back to satellite and now it just shows
Green bars " - - - -".

Am i ripped off now ?? or is there a way to recover this brand new box.

Please help me now what to do.


Gold Member
Username: Nydas

Post Number: 3752
Registered: Jun-06
asp lover : If you are really desperate, then I suggest you use your null modem cable to a computer, and try uploading the factory BIN via serial port.

Bronze Member
Username: Asplover

Post Number: 55
Registered: Jun-06
Thx Nalin

Yes i uploaded the factory bin and than latest bin again.

I have rescanned the channels and everything works now, i hope Autoroll will work too, lets see when the keys will change.

Gold Member
Username: Cartier1

Post Number: 1021
Registered: Feb-07
lover the keys will change tomorrow at 4 am . so weak up and see if it's autorolling . :_)
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us