C/P 1.Power down receiver and computer! 2.Connect receiver V27.01 to computer and power both of them up! 3.Start up gtrom loader or newest version and select the new bin file you wish to upload then click download wait until it is finished it will go to a 100 percent but it is not finish until it displays burn complete or finished! 4.Turn off power to receiver and computer and remove the cable from the receiver! 5.Install cable from the lnb and the cable from the tv and the plug it up and power up the receiver! 6.Using your remote hit menu and the parent control then ok in second pin enter 0000 and then ok! 7.Then set default key..EMU-ON then ok! 8.Go to Nagavision2 then ok and check 00 and 01 keys. Put in new keys if need then hit ok to save! 9.Now installation then ok antenna setup then ok make sure you have 110 and 119 and check to make sure the switch is set right for both on the diseqc setting! If 110 is on 1 and 119 is on 2, set diseqc the same way! 10.Now go to blind scan and hit ok! 11.When finished exit menu and watch tv!
dante...thats NOT true anymore and old and outdated...to begin, loader 27.01 is history now...
Jean...if U want to learn, then U must go to a Recommended Dss site (NOT here) that has files, manulas, videos, guide and how to's and READ there for at least 8 hours......ALL sites will have the pansat info U seek... www.future-fta.info is the pansat "unofficial " home site...
ahhh, u r right LK. The loader is v27.02. Sorry. Everything else will work. As long as 110 and 119 are the sats u r wanting. U will have to go to totalfta.c0m or somewhere similar to get the new bin file. u just have to register. U do need to read some. Its really easy. FTA is for dummies, at least it is for the end user. Look at the posts here that say pansat new bin. Dated the most recent