New member
Username: Smoke74

Post Number: 1
Registered: Sep-07
i unplugged my viewsat ultra and took the satellite cable out for 10 sec to reboot it and now I can't get any channels. What did I do and hoow do I fix it

Silver Member
Username: Cartier1

Post Number: 973
Registered: Feb-07
to be sure you should give more information .
you can not get any channel meaning there is no channel list? or there are channels but you just can not see the picture ?
what bin are you using ?
how many dish are you using .?
you setup what is it ?

are you using the latest autoroll bin or not . ?
were you watching the channels before you unplag you cable .?
come on rob.........

New member
Username: Smoke74

Post Number: 2
Registered: Sep-07
there is a channel list, but no picture. It says searching signal. I am using Bev and dish, I got it installed yesterday so all the codes are right. I was watching it before I decided to pull the plug. I'm sorry this is all new to me

New member
Username: Smoke74

Post Number: 3
Registered: Sep-07
oh...i can't get it to autoroll

Gold Member
Username: Hawaiian_time

Kanaka freak...

Post Number: 1417
Registered: Apr-06
Is the autoroll turned on? Sometimes the autoroll takes a while to process. Also make sure the cable is connected to the right jack.
« Previous Thread Next Thread »

Main Forums

Today's Posts

Forum Help

Follow Us