Fortec lifetime ultra fix for bev???

 

Bronze Member
Username: Thakkar2000

Post Number: 43
Registered: Jun-06
hi guys...when can we expect a bev fix for FLU??
thanks
 

Bronze Member
Username: Thakkar2000

Post Number: 44
Registered: Jun-06
>??????
 

Gold Member
Username: Nydas

Post Number: 3619
Registered: Jun-06
It is not very likely. There is as yet no fix for the minor problems of 17th august, so I doubt if you are going to get a new BIN for the current problems of 3rd september
 

New member
Username: Bhavin1231

Seekonk, Ma Usa

Post Number: 4
Registered: Sep-07
have a fortec lifetime ultra classe . i would like program online and i dont know how to prgrom online so plz if u can tell me how to and what kinda cable do i need and what type of file do i need for lifetime ultra classses . if u can send me link for the file and how to setup the recicver.thank you very much
 

Gold Member
Username: Nydas

Post Number: 3632
Registered: Jun-06
Become a member free at one of the following sites.
Go to Fortec Ultra section.
Download BL updater 1.4, BIN 294T and instructions.
Unzip files. Read instructions, read read read read.
Get a straight RS 232 cable (not a null modem cable)
UNZIP THE FILES.
Do the upload.
If you can't be patient and read very carefully for about 2 hours, don't attempt it.

[link removed]
http://www.dssrookie.com
 

New member
Username: Bhavin1231

Seekonk, Ma Usa

Post Number: 6
Registered: Sep-07
i didn't find any bl updater1.4. i have bl fortecstar updater3.14. i dont if this gone work or not.if u can help find this bine file .i need to what is STB modle. thank you very much
 

Silver Member
Username: Viruscauser

Leesburg, Georgia

Post Number: 155
Registered: Mar-07
Get BL loader 1.4 from: http://forums.dxxtester.com/vbb/showthread.php?t=45400

Note: replace the xx in the above address with ss.
 

New member
Username: Muki

Post Number: 5
Registered: Sep-07
I converted FLU to Pansat2700.On the installatio screen I have only the 110, 119, Nimiq1 and unused.With FLU I use to have a TK/5 or so for Globecast and also Nimiq2.How do I get this two again?

Thanks
 

Gold Member
Username: Nydas

Post Number: 3646
Registered: Jun-06
Globecast Provider ID is C101. It it is not there you can try entering it manually and then enter the globecast keys.
 

Bronze Member
Username: Abdou91

514

Post Number: 96
Registered: Jun-06
Rade Govedar
factory settins and back to normal
scan ur sat
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us