aits simple I founda way to make my keys without using any key finder ok letyour receiver rolling the keys about 2 min a ound that we need to change only the firt 2 digit number 0 1 2 3 4 5 6 7 8 9 A=10 B=11 C=12 D=13 E=14 F=15 FOR THE FIRST DIGIT ADD OR SUBSTRACT 4 FOR THE SECOND DIGIT ADD OR SUB 3 IE; keys found by yr box is F0 20 DF..... the correct are B3 20 DF....... WORKS FOR dn
i concur with that statement. i have 2 2500s and one 2700. the 2500 only needs the first digit changed. the 2700 needs the first two and i just discovered that the buzz regular can use the previous mentioned self key generator. thanks for confirming this for me.
flatulant kitty Here is a slight variation which is more accurate.
The second bit from the top, i.e. bit 6 of the first digit and the last two bits of the first digit i.e. bits 0 and 1 - these three bits are inverted. I just saw the numbers downloaded via 294T BIN on a Pansat clone. 01 - 0 0 0 0 0 0 0 1 becomes 42 - 0 1 0 0 0 0 1 0 D0 - 1 1 0 1 0 0 0 0 becomes 93 - 1 0 0 1 0 0 1 1
So when you get the numbers on the 294T BIN autorolling, invert bit 6 and bits 0 and 1 of the first digit of both key 00 and key 01 to get the correct key. Apply this correction only to the first digit.
A key number C1 is represented in binary as 1 1 0 0 0 0 0 1 Note I just pick up the 4 buinary digits for C and the 4 binary digits for 7 Similarly 56 is 0 1 0 1 0 1 1 0
The latest key morphing using 294T BIN - how to correct it. Supposing the first number of a key is C1 The binary is 1 (1) 0 0 0 0 (0) (1) - the ones I have put in brackets have to be inverted i.e. Invert bits 0,1 and 6 (this is the designation of bits from right to left) The number becomes 1 0 0 0 0 0 1 0 which is 82
Similarly 56 which is 0 (1) 0 1 0 1 (1) (0) becomes 0 (0) 0 1 0 1 (0) (1) or 15 The binary digits in the brackets got inverted.
The inversion correction is to be applied to the first number of Key 00 and of first number of key 01
All these sites ALWAYS have the latest files, bins, how to's, manuals, guides, dish pointing calulators and tips, hardware info, jtag info, newbie and getting started sections, actively moderated with a no troublemakers and no bashing allowed policy.. and are free, and only require a simple free registration...Your email info is kept private, unless U specify differently..and U will be notified via email of any replies to any questions U may ask (or U can shut that feature off, if U like)..and your IP is sacred and never released..
Many of these specialize in particular FTA receivers as noted next to their links..USE those for your particular receiver manufacturer..
If U want real info, trouble free, no costs, friendly help, no hassles, latest files and manuals, then use these...these are well established, and have a long history, and are the best known sites throughout the entire DSS community now...
Ecoustics is NOT a Dss site, since is has NO files, no manuals, no guides, little info, no specific categories, and is almost impossible to find anything because every thread here has been allowed to be hijacked (because no mods are active) and the Subject does not relate to the posts within it....also Ecoustics is basically an Electronics site for home audio, television, DVDs, stereo's, and things of that nature, NOT FTA satellite information .
So again I highly recommend using ANY of these sites BELOW!....U pick one and use it for fast , friendly info and files, and many of these also have a LIVE chat area what U can get an IMMEDIATE response from reliable knowlegeable sources!...U will save yourself much time, especially if you are a newbie to this hobby!...and most all also will have the latest keys posted as well, and the keymaster, keyripper, key grabber utility files to download as well....and if plastic is your thing , some also have an area for that as well as FTA..Good Luck and enjoy this hobby!
Data Viewing Sequences [link removed]
BTW...ALL these sites have the NEW working AUTOROLL bins released
does key morphing work all the time??? and does it work for C00lsat4k?? what is the most effective way that always works...and does it work for any bin?
A key number C1 is represented in binary as 1 1 0 0 0 0 0 1 Note I just pick up the 4 buinary digits for C and the 4 binary digits for 7 Similarly 56 is 0 1 0 1 0 1 1 0
The latest key morphing using 294T BIN - how to correct it. Supposing the first number of a key is C1 The binary is 1 (1) 0 0 0 0 (0) (1) - the ones I have put in brackets have to be inverted i.e. Invert bits 0,1 and 6 (this is the designation of bits from right to left) The number becomes 1 0 0 0 0 0 1 0 which is 82
Similarly 56 which is 0 (1) 0 1 0 1 (1) (0) becomes 0 (0) 0 1 0 1 (0) (1) or 15 The binary digits in the brackets got inverted.
The inversion correction is to be applied to the first number of Key 00 and of first number of key 01
fast beatz : If you have receiver that has a BIN published after 16th August, 2007, then use the latest BIN. If you are stuck with a receiver with a BIN that is older than that, you can either wait and install new keys manually or let them roll in with autoroll on, then turn autoroll off and use the technique I have described above. It works on all older BINs.