Transponder change (Sat 148, Ch 612, 613, 614)

 

New member
Username: Sunnyman

Post Number: 1
Registered: May-07
Hi,

I stopped getting Ch 612-614 on the 148 Satellite (Either it says "Autoroll processing" or "No Video or Audio"). A rescan caused these channels to be removed completely, so I cant even tune into them. Subsequently, I found out that the TP has changed (see below site and text):
SET Max, TV Asia and SET (612, 613 and 614) were removed from tp 11 at 148°. http://ekb.dbstalk.com/dishlist.htm

Question: What does this mean? How to I get to the new tp values? I thought a rescan takes care of changing tp values - do I need to scan differently to see these again?

I am new to this, so I am completely clueless as to what to do next.

Please guide. I have a VS (same thing being seen by others with a CS5000).

thanks in advance.
 

Gold Member
Username: Nydas

Post Number: 2729
Registered: Jun-06
1. You can do a Blind Scan.
2. You can turn auto TP on and let it scan the new TP.
3. You can manually add the new TP in the tP list and do a TP scan.
 

New member
Username: Sunnyman

Post Number: 2
Registered: May-07
Thank you Nalin.

I did #2, but ended up losing those 3 channels. So perhaps now I need to do a Factory Default and attempt a Blind Scan.

I couldnt figure out how to do #3.
 

Silver Member
Username: Albino_midget

Post Number: 516
Registered: Jul-06
on 5/9 the above site posted this:

"South Asian channels SET Max, TV Asia and SET added to tp 11 at 148° on channels 785, 786 and 792 last week became available to subscribers today."
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us