hi hi have a pansat 2700a receiver and i put in the new keys and save them turn off the receiver for a minute and turn it back on it works fine for a few minutes and then the picture stops and it goes back to waiting for picture. when i go back and see the keys are changed and i have to reenter them and it works for a few minutes and repeats the poblem someone please help thanks nimesh
thanks jason but when i turn the autoroll off then i do not get the picture at all and then i have to turn autoroll back on to get the picture but after a few minutes the keys get screwed up and it goes back to waiting for picture thanks nimesh
hello im new at this i have a pansat 2700a and when i turned on my pansat today it said waiting for picture what do i need to do to get my pansat going again?
first go to meanu..parental control..second pin enter 0000...than u will see the page say SECA..go down to autoroll option press ok...leave the keycode to ON...and the last 3 turn it to OFF....that mean u have turn off your autoroll....now exit it all the way out to the screen than follow this to enter new keys....
Pansats:
1. Hit the Menu button. 2. Then scroll down to Parental Code, and hit "OK". 3. Then go to Second Pin and enter all zeros. (0000) 4. Now scroll down to Nagravision 2 and hit "OK" 5. On Provider ID, select the Provider you need, Dish Net, or Bev. 6. Move down to Key Number. Depending on what key you need to enter, you will change the key number by using the left or right arrows only. Key 86 is the same as Key Number 00, and Key 96 is the same as Key Number 01. 7. At the bottom of the page it will tell you which buttons to use to get the appropriate letters for your keys. 8. Once you have changed the necessary keys, hit the "OK" button and make sure that the "OK Store" words blink at the bottom right corner. 9. Exit all the way out of your Menu, and change channel. 10. Watch TV.
nimesh : 1. You must be 100% sure you have a genuine Pansat 2700A/E receiver. Go to Pansatusa site to check this if you have to. 2. From today onwards, you WILL need B75 boot and the latest BIN on top. There is a new BIN out today. The al7bar site has good instuctions.
hello i have been putting the codes and they dont work just wondering if i have a subscription to dish already and i just connect my pansat while the dish one is on does it affect it cause i still get nothing