VS Ultra help

 

Bronze Member
Username: Imnycusa

Post Number: 73
Registered: Jun-06
I am helping a friend of mine to set up new VS ultra purchased from an authorized dealer. Having flashed with latestet bin, auto sat scan does not bring any channels. There is no signal strength or quality being seen by the new unit. However, old Fortec Ultra connected to the same set up shows signal and quality near 99%. He has legacy quad LNB with only one feed (so no Diseqc). Please advice. Thanks.
 

Silver Member
Username: Bones714

Somewhere fi...

Post Number: 336
Registered: Mar-05
check your settings in the menu section
 

Bronze Member
Username: Imnycusa

Post Number: 74
Registered: Jun-06
following is the setting:
Echo3
LNB Power on
LNB Type Universal
LNB High 10600
LNB Low 9750
TP Freq 12297
DiSeqC 1.0 Off
Legacy Sw none

I am at loss what could be done to resolve this issue.
 

Silver Member
Username: Hawaiian_time

Kanaka freak...

Post Number: 972
Registered: Apr-06
What kind of LNB do you have? Try the different LNB type settings.
 

Silver Member
Username: Tapeman

New York, NY

Post Number: 922
Registered: Oct-06
He is got that
"He has legacy quad LNB with only one feed "

Most likely wrong flash or flash wasn't complete
 

Silver Member
Username: Tapeman

New York, NY

Post Number: 923
Registered: Oct-06
Actually in antenna setup there is legacy quad LNB selection but I doubt if that is the only reason
 

Gold Member
Username: Satscanner

Beaversbush, Sportsmans P... Great White ...

Post Number: 1611
Registered: Nov-06
"Somebody Help Me"...WHOOOOO ! Mashed potatoes! Whoooo !
 

Gold Member
Username: Lklives

Post Number: 8549
Registered: Jan-06
legacy quad working on a old fortec is rare...and on the VS, U better have SW on then..along with freq 11250 and LNB type as standard..U really have alot of reading to do..
« Previous Thread Next Thread »



Main Forums

Today's Posts

Forum Help

Follow Us