Many of these came out as threads but never got resolved. So can any one explain ??? my setup pansat 2700A motorized 30in dish dual rca lnb
all other sats work fine it seems that as i go manually over 119 the level rises so i know there is a satellite there but no quality and I also changed to tp2 because I heard tp1 won't work for 119. Thanks in advance
If you can get one and not the other, it is a setup issue. It can also be compatibility between LNB and receiver.
When you say all other SATs work fine you have to list SATs you R getting, be specific. does this include 97, 121, 148 etc and DISEqC assignments. I can see you are Albanian and awaiting for Globcast
You might be using Linear LNB to get 110 or 119 Be specific and you will find dozens of skilled tech supports willing to help King
i didn't want to add the other lnb to lessen confusion but I have too lnbs (one Ku- one linear) the Ku gets Nimiq2, nimiq 1.3, dish 110, and another one with all Arabian channels or something like that i think it's 141) when i turn from 110 farther the level rises like it's about to pick up a sat (all the way to 87%)but then drops back to 70% so I think 119 is here (the linear lnb plays no role in this as i'm not using the diseq switch until i know it can be read straight through first.
All set-up issues By the way everything you mentioned all Ku-band I don't know about Linear picking Nimiq 82/91 I think you are just lucky picking few TP
These tips maybe helpful "KING's TEN COMMANDMENTS" 1- Make sure dish is "steady" not Moving. 2- Pointing each dish to correct SAT www-satellitenut-com 3- Make sure using latest bin PGM. 4- One LNB per SAT Use Correct LNB (Circular for 61.5, 82,91,110,119,148 or Linear for 121,97,93) 5- Try each SAT one at a time, Scan one SAT at a time. 6- Always try without DISEqC switch first WITH RECEIVER OFF. 7- Use quad shield cables RG-6 with good covered crimps. 8- Antenna set-up (usually 2 items LNB types and port assigning) Assign each SAT to a unique port (i.e. Port 1,2,3 or4) 9- Turn off LNB that you R not using while scanning other LNB when you got multiple LNBs used for multiple SATs to avoid doubles.
